Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2006, 06:37 AM
mv540's Avatar
mv540 mv540 is offline
Kaibil
 
Join Date: Dec 2005
Location: Land of Eternal Spring
Posts: 381
Unhappy problem with my gun

I have a pilot acs 05, the internal parts are all stock, I have a redz feedneck and a halo hopper, but when I start firing with two fingers, or in auto mod the paintballs goes anywhere they want, down, to the left, ecxept where i´m aiming

I use evil paintballs, I have the stock barrel but the acuraccy is bad.

Do I have to change something in my gun?, Do I have to upgrade internal parts??

OHH!!!! also the my friend´s electra do the same...

help
__________________
If I advance, follow me---if I stop, grab me---if If I retreat, kill me...KABIL 4 LIFE...

Last edited by mv540 : 01-29-2006 at 07:35 AM.
Reply With Quote
  #2  
Old 01-29-2006, 10:21 AM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: problem with my gun

... well it's really cuz of your stock barrel .. try buying an aftermarket barrel like tear drop, j&j ceamic, or a cp 1 piece.

It also could be worse because your barrel isn't clean ... and there's also a big chance it's occuring because of your co2 .. which im assuming .. since it spikes like crazy
Reply With Quote
  #3  
Old 01-29-2006, 12:08 PM
mv540's Avatar
mv540 mv540 is offline
Kaibil
 
Join Date: Dec 2005
Location: Land of Eternal Spring
Posts: 381
Default Re: problem with my gun

Quote:
Originally Posted by ooglieboogliebob
...
... and there's also a big chance it's occuring because of your co2 .. which im assuming .. since it spikes like crazy
You´re saying that using compress air is better than CO2???
__________________
If I advance, follow me---if I stop, grab me---if If I retreat, kill me...KABIL 4 LIFE...
Reply With Quote
  #4  
Old 01-29-2006, 01:11 PM
SparkyGT's Avatar
SparkyGT SparkyGT is offline
Timmy Collector
 
Join Date: Jan 2006
Location: Alberta Canada
Posts: 409
Default Re: problem with my gun

What did you get your gun chrono'd at? try borrowing a barrell and see if it makes a difference. also take a few balls and check to see if they roll fine across a flat table, if they are slightly eggshaped they will go everywhere
__________________
WTB -MR1 Gripframes, PM me with details, thanks !

Pics of my Stuff- Aprill 2011 !

Feedback +11/-0
OFCM#9
Online M-F / Weekend Gone
Paypal
Reply With Quote
  #5  
Old 01-29-2006, 01:52 PM
PandaTruenoGTS PandaTruenoGTS is offline
Member
 
Join Date: Jan 2006
Posts: 60
Default Re: problem with my gun

Stock barrels almost always suck on lower end guns. I got a 14" Dye Proto on my pilot which is really nice for mid-range shooting and shoots through breaks very nicely,I also noticed the pilot shoots a tad high velocity which can cause balls to curve madly, you can get 32 Degrees Spring kit on ebay for less than $10 shipped. The Dye Proto barrel cost me about $50 at a local pro shop.
Reply With Quote
  #6  
Old 01-29-2006, 08:09 PM
mv540's Avatar
mv540 mv540 is offline
Kaibil
 
Join Date: Dec 2005
Location: Land of Eternal Spring
Posts: 381
Default Re: problem with my gun

i´m a lit nebwie in paintball...so be patient with me

What do you mean "32 Degrees Spring kit", what they do??? what do the spring do? what is it?
__________________
If I advance, follow me---if I stop, grab me---if If I retreat, kill me...KABIL 4 LIFE...
Reply With Quote
  #7  
Old 01-29-2006, 08:18 PM
durrell's Avatar
durrell durrell is offline
wat
 
Join Date: Dec 2005
Location: North Carolina
Posts: 3,927
Default Re: problem with my gun

http://www.pbreview.com/products/reviews/2138/

The long springs are "main" springs. These control the tension put on the striker/bolt, affecting how hard the bolt hits the ball.

The short springs are "valve springs". These affect how hard it is for the striker to push the valve pin/cup seal assembly and open the actual valve. Both affect velocity and operating pressure.
__________________
lol paintball
Reply With Quote
  #8  
Old 01-30-2006, 08:37 AM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: problem with my gun

yeah .. what he said
Reply With Quote
  #9  
Old 01-30-2006, 12:43 PM
mv540's Avatar
mv540 mv540 is offline
Kaibil
 
Join Date: Dec 2005
Location: Land of Eternal Spring
Posts: 381
Default Re: problem with my gun

...Somebody knows if the "32 Degrees Spring kit" has all the spings I need???
__________________
If I advance, follow me---if I stop, grab me---if If I retreat, kill me...KABIL 4 LIFE...
Reply With Quote
  #10  
Old 01-30-2006, 02:02 PM
PandaTruenoGTS PandaTruenoGTS is offline
Member
 
Join Date: Jan 2006
Posts: 60
Default Re: problem with my gun

yes, I have them installed on my Pilot ACS. Easy to install and cheap. They come as a set. 3 Valve Springs and 3 Bolt Springs. The reason there is 3 is because they are set for different pressure. 1 spring is heavy (high velocity) 1 is medium (medium velocity) and 1 light (you get the idea). You can mix and match between the valve and bolt to fine tune to the right velocity for your rig. My advice is to start with light springs on both the valve and bolt and work your way through the combinations til you find the right velocity for your setup. This will also help train you on assembly and dis-assembly of your gun, as you will have to dissasemble it abou 70% of the way to install both springs. Hope that helps.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 12:33 PM.