Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2007, 06:51 PM
Docc Docc is offline
New Guy
 
Join Date: May 2007
Location: Central Iowa Des Moines Area
Posts: 16
Default CCM Feedneck Problem

Hello,

Ok, I purchased a CCM feedneck with the hopper adapter.

With my M16 carry handle and sight rail and the Fasta 18V hopper, I am finding it incredibly difficult to fit a Red Dot sight on top.

If you have any new ideas I would sure appreciate it.
__________________
Love this game,

Doc

Spyder MR2 (Semi, 3 Burst, Fully Auto)
Spyder MR1 (Semi, my trusty back up)
J&J Ceramic 14" & 20"
Fasta 18V hopper
Swat Red/Green Dot Sight
M16 Carry handle with sight rail
3000psi, Pure Energy Tank
Reply With Quote
  #2  
Old 05-29-2007, 07:20 PM
MR2 Woodsballer's Avatar
MR2 Woodsballer MR2 Woodsballer is offline
Ex-Woodsball Player
 
Join Date: Dec 2006
Location: College Station, TX
Posts: 547
Default Re: CCM Feedneck Problem

a side mount like this one: http://www.actionvillage.com/is-bin/...gAAAD6ysB1Movs
Reply With Quote
  #3  
Old 05-30-2007, 03:53 AM
Docc Docc is offline
New Guy
 
Join Date: May 2007
Location: Central Iowa Des Moines Area
Posts: 16
Default Re: CCM Feedneck Problem

Thank you very much!
__________________
Love this game,

Doc

Spyder MR2 (Semi, 3 Burst, Fully Auto)
Spyder MR1 (Semi, my trusty back up)
J&J Ceramic 14" & 20"
Fasta 18V hopper
Swat Red/Green Dot Sight
M16 Carry handle with sight rail
3000psi, Pure Energy Tank
Reply With Quote
  #4  
Old 05-30-2007, 05:56 AM
badmagic's Avatar
badmagic badmagic is offline
South Texas Woodsballer
 
Join Date: May 2007
Location: South Texas
Posts: 43
Default Re: CCM Feedneck Problem

Is the problem that the carry handle is to high? Or does the carry handle have the wrong size mount?
__________________
Civilization begins with order, grows with liberty, and dies with chaos.

South Texas Woodsballer
Check out me and my gear
Reply With Quote
  #5  
Old 05-30-2007, 07:52 AM
Voodoo27909's Avatar
Voodoo27909 Voodoo27909 is offline
Scenario Junkie
 
Join Date: Jan 2006
Posts: 220
Default Re: CCM Feedneck Problem

I took a 1" wide piece of flat aircraft grade alum (equally as long as the carry handle). and moved the carry handle off to the side just enough to clear the CCM feedneck to accomodate a BSA scope. It looked pretty natural after some flat black woodstove paint. The original mounting screw holes for the carry handles old position were no problem in mounting the alum. flat (using shorter screws of course)... but I did have to tap holes in the alum. piece for the new position of the handle, and used those original screws in the new mounting position. My EGGIII hopper clamps downs with just a slight turn out to clear the scope now, but my Halo clears with no problems what so ever
Reply With Quote
  #6  
Old 05-30-2007, 09:13 AM
Docc Docc is offline
New Guy
 
Join Date: May 2007
Location: Central Iowa Des Moines Area
Posts: 16
Default Re: CCM Feedneck Problem

Quote:
Originally Posted by badmagic
Is the problem that the carry handle is to high? Or does the carry handle have the wrong size mount?

Seems to high, and the feed neck doesn't jet out 'enuf' to the right... I think the off set rail will handle the problem nicely. I ordered it this morning. Since I'm not a aluminum fabricator, I think this is clearly the easiest fix for me...

Thanks for the interest!
__________________
Love this game,

Doc

Spyder MR2 (Semi, 3 Burst, Fully Auto)
Spyder MR1 (Semi, my trusty back up)
J&J Ceramic 14" & 20"
Fasta 18V hopper
Swat Red/Green Dot Sight
M16 Carry handle with sight rail
3000psi, Pure Energy Tank
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 04:42 PM.