![]() |
|
#1
|
|||
|
|||
|
I can't figure out why the gun won't fire when the eyes are on even if paint is blocking the eyes. If theis blocking the eyes the solenoid won't even click.
__________________
Having Vs problems/Questions Click me |
|
#2
|
||||
|
||||
try putting the gun on triple shot and turn the eyes off then back on. this should give you a definite answer![]()
__________________
Jimmy "the Hick"
|
|
#3
|
|||
|
|||
|
already tried edit wait what? the eyes can't be on in triple shot
__________________
Having Vs problems/Questions Click me |
|
#4
|
||||
|
||||
|
He means go into burst mode and see if it works.
__________________
05 Imagine Palmer stabilizer Maddman Rocket valve Trinity Front block IPS Sunbear Bolt Dark Horizon titanium striker Green/silver VSC CCI Phantom Red/Black PMR SE |
|
#5
|
|||
|
|||
|
it works with eyes off
__________________
Having Vs problems/Questions Click me |
|
#6
|
||||
|
||||
|
Your eyes work with the eyes off? Is something connected backwards?
__________________
|
|
#7
|
|||
|
|||
|
Mine has been doing the same thing recently. With a fully charged battery and eyes on it will just blink. When eyes are turned off or they eyes are unplugged in eye mode on it will fire.
|
|
#8
|
|||
|
|||
|
no what I meant was the gun works fine with eyes off so I know it is the eyes that are messed up
__________________
Having Vs problems/Questions Click me |
|
#9
|
||||
|
||||
|
pinched wires? if you know the eyes are messed up, then call kingman and theyll send you a new pair
__________________
Spyder vs2 red body kit barrel tip(red) Shocktech drop, with ndz ultralite on/off Cp regulator (red) trinity reg adapter crossfire 68/45 tank Virtue Board Halo w/v35 board Was it worth it.....? TOTALLY! |
|
#10
|
||||
|
||||
This seems to be a common problem with VS's... You absolutely need to be careful and watch what you're doing as you close the frame back onto the body, as the path for the wires is narrow. Kingman's number is (888) KINGMAN. Give them a call.If you don't notice a pinch, unplug the connector, blow off the dust, reconnect it, and then try. If they still don't work, give Kingman a buzz.
__________________
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0) URT... Ultimate Resource Thread! The [OFFICIAL] Manual Thread! BigRed Photography Quote:
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|