|
|
#22
04-02-2007, 04:44 PM
|
|||
|
|||
Re: Virtue Board for the Spyder VS Series
Are there any complications from this board with the VS3 rocking trigger? I read the other thread and it said it needed some stuff done to it.
|
|
#23
04-03-2007, 07:09 AM
|
|||
|
|||
|
Re: Virtue Board for the Spyder VS Series
Sam - We do not have a eye sensitivity option, and from our testing, I did not see any need for it. What were you trying to acheive by adjusting it?
Ham - Dont have to edit anything, there is a 3 pin and 5 pin connector depending on your rocking trigger.
|
|
#24
04-03-2007, 04:38 PM
|
|||
|
|||
|
Re: Virtue Board for the Spyder VS Series
it is lucky i need to august the eyes so it doesn't chop paintballs i posted this here because they both use lazer eyes so i figured the eye sensitivity the vs2 needs would be the same on both boards am i wrong
__________________
vs2 lucky spitfire w/red eyes green was sold out  green tip makeing barrel 14 inches ventis helix empire reloder b crossfire 47, 3000 tank
|
|
#25
04-03-2007, 07:44 PM
|
||||
|
||||
|
Re: Virtue Board for the Spyder VS Series
Eye sensitivity is seen on bounce beam boards to adjust for paint color since they sometimes have trouble seeing particular colors such as black or dark colors. I have that option on the ECS board in my Impulse for manual or auto setting. The ECS automatic setting is where in safe mode; I just drop a ball in the feedneck, then pull the trigger and it automatically sets the sensitivity for that particular color -
Since this board has cross beam eyes there's really no sense in an eye sensitivity. Once the ball breaks the beam, the board knows it's OK to let the bolt go forward. It doesn't rely on a reflective beam to bounce back. Don't know about this board but some cross beam boards such as the WAS boards check the breech one million times a second.  - Who knows, I may even do a review on this board in the near future - 
__________________
 KUSA Old School Alumni #4939Registered: 6/26/02 Posts: 14,000+ before the old mothership went down Jealousy is the tribute mediocrity pays to genius while feeling alone apposed to smiling adversaries.... 
|
|
#26
04-07-2007, 05:41 PM
|
||||
|
||||
|
Re: Virtue Board for the Spyder VS Series
Well, I did it. I actually fried my brand new Virtue Board.
I don't know the exact reason, yet. Still waiting on the verdict from Virtue after they do their autopsy. I think my fingers are just too fast (SARCASM).  Either that, or it came from the factory with a problem.
__________________
|
|
#27
05-10-2007, 09:34 PM
|
||||
|
||||
|
Re: Virtue Board for the Spyder VS Series
Virtue replaced the board but never did tell me what was wrong with original one. After some more fine tuning it shoots excellent...
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
