Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Mechanical Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 02-04-2009, 08:22 PM
GR34 GR34 is offline
New Guy
Join Date: Jul 2008
Posts: 21
Default under slung co2

Does any one know of a kit or some way of modding my MR1 so that I can have the co2 mounted under the barrel instead of at the back?
Reply With Quote
Old 02-04-2009, 08:29 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: under slung co2

There are alot of ways you could do it make a braket that ataches to the barrel or forgrip to hold your asa and get the appropriate size braided line or macro to fit the distance. Its more really about what works for you rather then how to do it.

Why do you want it under the barrel?
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander

Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)

-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
Old 02-04-2009, 09:04 PM
GR34 GR34 is offline
New Guy
Join Date: Jul 2008
Posts: 21
Default Re: under slung co2

I want it under b/c that would look bad ass and I cant stand a remote line. I also want to use a stock
Reply With Quote
Old 02-05-2009, 10:34 AM
Solar Solar is offline
Yeah, like the sun.
Join Date: May 2007
Location: New Jersey
Posts: 129
Default Re: under slung co2

I've seen stocks that actually conceal the CO2 container in them not sure if it will fit the MR series guns though...

it's here
towards the botttom

kind of pricey though.
Pilot owners club #51
Pilot ACS, Dye Boomstick Barrel, Clamping Feedneck, Palmer Stabilizer, Trinity Front Block, Madman Rocket Valve, Polished/Cupped striker, T-Board, 50g switch, Dye Sticky Grips
Reply With Quote
Old 02-05-2009, 11:59 AM
irishwarrior's Avatar
irishwarrior irishwarrior is offline
this is my coat of arms and this is my dynasty Uí Fiachrach
Join Date: Jul 2006
Location: VA
Posts: 1,283
Default Re: under slung co2

That stock wouldn't work for a spyder, the air systems are laid out much differently.
People crave what they don't have.

Vid of me and my Guitar
derek_owns_a_guerrilla_radio-School buses don't = target practice, Hoss.. 
Hossapher-i shot alot of different types

MR1 Sniper Rifle
Rocket Launcher
Reply With Quote
Old 02-05-2009, 12:30 PM
BYUrdneck's Avatar
BYUrdneck BYUrdneck is offline
Open for ideas
Join Date: Nov 2007
Location: Utah
Posts: 153
Default Re: under slung co2

what you could do is go to a local hardware store and find a male/male 1/8" npt brass adapter (http://www.toolorbit.com/Brand/Air-L...ker-A1266.html) - take off the fake mag and airline - attach the adapter to the marker where the airline goes into the gun - find an ASA that has a port for an airline on the side rather than the front (like the stock MR1) and screw it into the other end of the brass adapter and tighten it so that the end where the tank screws in is facing forward - screw in your tank and there you go. Be sure to use teflon tape. I wouldn't use a big tank like a 20 oz because of weight, so try to use a smaller one. Before you do anything - line up everything to see if you have clearance for the tank - that it doesn't hit the gun or the reservoir plug. It might not even work out if the tank will be in the way of stuff.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 08:49 PM.