Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-2007, 02:51 PM
blacklabel21 blacklabel21 is offline
Member
 
Join Date: Jan 2006
Location: Columbiana,Ohio
Posts: 40
Default Electra question

I have a spyder Electra ACS. Back of a bolt their is a screw in it.Does it matter if its in all the way or not.I took it all apart now i aint sure if the screw goes in all the way or not thanks.Any Help would be nice.And more question I bought my gun used but aint it suppose to have o rings on the acs bolt.Or will i have to put orings on the bolt.

Last edited by blacklabel21 : 04-02-2007 at 03:17 PM.
Reply With Quote
  #2  
Old 04-02-2007, 03:50 PM
pb34's Avatar
pb34 pb34 is offline
Not too new guy
 
Join Date: Jul 2006
Posts: 1,526
Default Re: Electra question

Quote:
Originally Posted by blacklabel21
I have a spyder Electra ACS. Back of a bolt their is a screw in it.Does it matter if its in all the way or not.I took it all apart now i aint sure if the screw goes in all the way or not thanks.Any Help would be nice.And more question I bought my gun used but aint it suppose to have o rings on the acs bolt.Or will i have to put orings on the bolt.
I'm not quite sure which screw your talking about in the first part. If your talking about the screw on the bolt, it is a set screw that holds the cocking knob in. Make sure it is tight enough that the knob doesn't come out easily but loose enough that you can get the knob out. As for the o-rings, if it is a delrin ACS bolt, it does not use o-rings. Only alluminum ACS bolts use o-rings. You can tell if it's delrin if the bolt is white.

EDIT: If you are talking about the screw on the velocity adjuster, it is good to have it tight so your velocity adjuster doesn't turn while you are playing.
__________________
Almost finished LP Pilot

<<XX PILOT OWNERS CLUB # 36 XX>>

The Official Manual Thread


Spyder Feedback
PBN Feedback
Reply With Quote
  #3  
Old 04-02-2007, 03:56 PM
BrianT's Avatar
BrianT BrianT is offline
When the pin is pulled, Mr. Genade is not your friend.
 
Join Date: Jan 2007
Posts: 272
Default Re: Electra question

is the screw in first question that you are reffering to velocity adjuster? if so then no is doesn't that just adjusts how fast the balls shoot out of the gun. hope that helps some.
__________________

Spyder Elecltra
14" ACI Zero Gravity Barrel
Empire Loader


IF YOUR PARENTS DONT PAY FOR YOU TO PLAY PAINTBALL PUT THIS IN YOUR SIG
Reply With Quote
  #4  
Old 04-02-2007, 06:00 PM
blacklabel21 blacklabel21 is offline
Member
 
Join Date: Jan 2006
Location: Columbiana,Ohio
Posts: 40
Default Re: Electra question

the screw i am talking about is in the bolt.BUt if its hold the cocking knob in then i will tighten down good.
Reply With Quote
  #5  
Old 04-02-2007, 06:23 PM
pb34's Avatar
pb34 pb34 is offline
Not too new guy
 
Join Date: Jul 2006
Posts: 1,526
Default Re: Electra question

Quote:
Originally Posted by blacklabel21
the screw i am talking about is in the bolt.BUt if its hold the cocking knob in then i will tighten down good.
Yea it sounds like the set screw. Just be careful, if you tighten it too much, it will be a pain to take the knob out.
__________________
Almost finished LP Pilot

<<XX PILOT OWNERS CLUB # 36 XX>>

The Official Manual Thread


Spyder Feedback
PBN Feedback
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 08:27 PM.