Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 01-13-2006, 05:26 AM
Tonee Tonee is offline
Join Date: Jan 2006
Posts: 28
Default leaking

is coming from where I screw my bottle to my gun...

will this be the bottles O ring that is causing it? (it looks ok?)

Spyder Electra ACS '05
Proto 1 Piece Barrel
Pure Energy 72cu 3000psi
Reloader B with Rip Drive
ACS Bolt

Too come;
Trinity Feed Neck

Electra Club Founder #2
Reply With Quote
Old 01-13-2006, 06:53 AM
bamf-hacker's Avatar
bamf-hacker bamf-hacker is offline
Bling Bling Bling
Join Date: Dec 2005
Location: In your PC...
Posts: 5,941
Default Re: leaking

looks can be deceiving. Take it off and closely inspect it. Or just replace it with new one. Tank o-rings are super cheap.

Also is it coming from the side with the bottle or the side with the steel braided hose? If it is the latter it could be the fitting seal. Take it apart and re-Teflon it, make sure not to get the tape on the inside of the threads.

Originally Posted by TheRedBarron
secks comes to mind everytime I look at those markers. pure freaky secks.

You have been roshamboed
Reply With Quote
Old 01-15-2006, 01:11 AM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: leaking

i'd just replace it ... the o-ring usually starts to change colors when it starts to go bad .. i usually replace it before that. It could also always be the hose as hacker said. If you don't have teflon you can use blue loctite. Teflon's cheaper ... like 3 bucks for 5 rolls or so
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 02:59 AM.