Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 01-01-2007, 01:49 PM
Posts: n/a
Arrow Cup seal

how do i fix it because mine is leaking. i know it involves sanding but what kind of grit and how do i do it?
Reply With Quote
Old 01-01-2007, 02:59 PM
Fury123's Avatar
Fury123 Fury123 is offline
i'd tap that...
Join Date: Dec 2006
Location: Chi-town
Posts: 16
Default Re: Cup seal

i had the same problem but i returned my pilot and they told me it was the valve...make sure u check the valve, but this is what Halucin8 told me,
take the cupseal out and lay a piece of very smooth sandpaper 1000 grit or better and put it on a flat surface then rub the cupdeal in a figure 8 motion a couple of times then reinstall. should work much better
Reply With Quote
Old 01-01-2007, 03:25 PM
Posts: n/a
Default Re: Cup seal

thanx for the info uh where could i get 1000 grit sandpaper? wally world doesnt have it and i havent been able to look in home depot yet.

Last edited by boomerisnuts : 01-01-2007 at 03:41 PM.
Reply With Quote
Old 01-01-2007, 04:12 PM
vikingshadow's Avatar
vikingshadow vikingshadow is offline
Ah-roo! Ah-roo! Ah-roo!
Join Date: Dec 2005
Location: Where my stuff is. Duh!
Posts: 6,950
Default Re: Cup seal

Look in the Automotive section - the Wal-Mart here carries it there.

I didn't even know about the sandpaper thing...cool tip!
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
Reply With Quote
Old 01-01-2007, 06:37 PM
Halucin8's Avatar
Halucin8 Halucin8 is offline
Join Date: May 2006
Location: North Carolina
Posts: 453
Default Re: Cup seal

it flattens out the seal and roughs/softens the sealing edge to make a better seal. when i went to the 32 degrres turbo valve i went through all three of my cupseals and none of them would seal. Once i sanded down the sealing side making sure it was flat and soft i haven't had a problemn in months and i shoot atleast a case every sunday in the woods.
Dragun T-1-clamping feedneck,Torp hpr,Micro-Rock LPR.
Pilot ACS-Low-Blow bolt,cocker feedneck,T-1 Hpr, turbo valve,polished
DragunFly-T-1 LPR,T-1 HPR
Dragunfire-TES Hpr,Polished
Rebel-Half-backed(by me)
Black LCD Fasta
Reply With Quote
Old 01-01-2007, 07:05 PM
Sandman_Bravo's Avatar
Sandman_Bravo Sandman_Bravo is offline
Spyder Vet
Join Date: Mar 2006
Location: boondocks, west-bum**ck
Posts: 1,845
Default Re: Cup seal

Lapco makes a great replacement:
Think about it: Click Me * My Feedback
These colors will never run.
Reply With Quote
Old 01-05-2007, 05:26 PM
tnballer tnballer is offline
Join Date: Jan 2007
Location: hills of tn
Posts: 55
Default Re: Cup seal

just about every automotive shop carries it its used to wet sand cars

on another note would regulating the air preasure help with this
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 08:54 PM.