Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2008, 05:06 PM
Spec-Ops Spec-Ops is offline
New Guy
 
Join Date: May 2008
Posts: 5
Angry '05 Electra bolt does not come out.

I have the '05 Electra and I can not get the cocking knob out so I can remove the bolt. I have done everything. I've pulled straight up, I've used pliers and pulled as hard as I can and it will not come out (and I'm not like a tiny kid either) I'm sick of not being able to dis-assemble my marker. If I knew that it would be so complicated to maintain my marker I would have never gotten a Spyder.
Reply With Quote
  #2  
Old 05-07-2008, 05:17 PM
TheDarkShadow's Avatar
TheDarkShadow TheDarkShadow is offline
add 1,794 posts
 
Join Date: Feb 2008
Location: South East IN
Posts: 2,775
Default Re: '05 Electra bolt does not come out.

try to unscrew the screw in the back of the bolt, but be careful to not strip it out
__________________
E-framed Sonix Pro
2009/2010 bone stock sonix
Reply With Quote
  #3  
Old 05-07-2008, 05:27 PM
Spec-Ops Spec-Ops is offline
New Guy
 
Join Date: May 2008
Posts: 5
Default Re: '05 Electra bolt does not come out.

Quote:
Originally Posted by TheDarkShadow View Post
try to unscrew the screw in the back of the bolt, but be careful to not strip it out
Did that. It definatly loosend the cocking knob but it definatly won't come out still. I am thinking that the slot on top where the cocking knob goes back and forth when shot on the body on the marker is too thin. like the base of the cocking knob it to fat to fit through. Could this be possible?
Reply With Quote
  #4  
Old 05-07-2008, 06:12 PM
Hossy's Avatar
Hossy Hossy is offline
Has Been
 
Join Date: Apr 2006
Posts: 3,401
Default Re: '05 Electra bolt does not come out.

are you sure your not being too careful?
are you sure you didnt tighten it the screw?

the first time I did it I had to yank, after that it seemed fine
__________________

Quote:
Originally Posted by HelpDeskHustler View Post
It just occurred to me that "bad company" may be a terrible name for a team sponsored by only one company.
Reply With Quote
  #5  
Old 05-07-2008, 06:21 PM
TheDarkShadow's Avatar
TheDarkShadow TheDarkShadow is offline
add 1,794 posts
 
Join Date: Feb 2008
Location: South East IN
Posts: 2,775
Default Re: '05 Electra bolt does not come out.

yea the first time is always the hardest
__________________
E-framed Sonix Pro
2009/2010 bone stock sonix
Reply With Quote
  #6  
Old 05-07-2008, 06:22 PM
MVS1's Avatar
MVS1 MVS1 is offline
Finally!!!
 
Join Date: Jun 2006
Location: Hochspeyer Germany
Posts: 1,229
Default Re: '05 Electra bolt does not come out.

Spec, bare down and pull that Biatch out, it will come out it just takes some "persuasion" (sp..pretty sure that's right but I do only have a high school ed..).
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting
Angel 1 Non-SOM Apr 07
Ripper 3 Non-SOM Apr 08
Family Photo
My Feedback
Reply With Quote
  #7  
Old 05-07-2008, 06:23 PM
Spec-Ops Spec-Ops is offline
New Guy
 
Join Date: May 2008
Posts: 5
Default Re: '05 Electra bolt does not come out.

I fully removed the screw thing and i pulled as hard as I could with pliers on the cocking knob. My dad even pulled as hard as he could still it didn't come out. I mean I've put some real force into it and still nothing.
Reply With Quote
  #8  
Old 05-07-2008, 06:25 PM
MVS1's Avatar
MVS1 MVS1 is offline
Finally!!!
 
Join Date: Jun 2006
Location: Hochspeyer Germany
Posts: 1,229
Default Re: '05 Electra bolt does not come out.

Throw a couple drops of marker oil in there, let it sit then give it another go. Try using a twisting motion while pulling on it....It's a ***** but it will come out
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting
Angel 1 Non-SOM Apr 07
Ripper 3 Non-SOM Apr 08
Family Photo
My Feedback
Reply With Quote
  #9  
Old 05-07-2008, 06:29 PM
TheDarkShadow's Avatar
TheDarkShadow TheDarkShadow is offline
add 1,794 posts
 
Join Date: Feb 2008
Location: South East IN
Posts: 2,775
Default Re: '05 Electra bolt does not come out.

ok never tried this, but if you are really desperate to get it off, one person take the body, another person grab a claw hammerput the clawon the knob and pull on that som*****. possibly not a great idea but that's all I got
__________________
E-framed Sonix Pro
2009/2010 bone stock sonix
Reply With Quote
  #10  
Old 05-07-2008, 06:33 PM
MVS1's Avatar
MVS1 MVS1 is offline
Finally!!!
 
Join Date: Jun 2006
Location: Hochspeyer Germany
Posts: 1,229
Default Re: '05 Electra bolt does not come out.

A claw hammmer!?!?! damn that's a pretty good use of common hand tools...put some electrical tape on the body to make sure the body and hammer don't come in contact and give it a go....Nice one Shadow
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting
Angel 1 Non-SOM Apr 07
Ripper 3 Non-SOM Apr 08
Family Photo
My Feedback
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 08:15 PM.