Show Your MR1

[Shoba]

Actually if I wrap the ghillie correctly the pin isnt an issue but its hard to see that from the pictures.

[FireRoastedFire]

All of these MR1's are so amazing. I must post mine immediately. Expect to see a MR1 Sniper like no other.... well, kinda. It's purdy.

[FireRoastedFire]

I'm no photographer, but here is Sarah, my trusty MR1:





Specs:
Spyder MR1 (Duh)
RAP4 Tippmann98 to Spyder Thread Adapter
Stiffi 23" Carbon Fiber Barrel - .691 stepped bore - tipp 98 thread
Ultimate Paintball Adjustable Sniper Carstock
RAP4 Dual Offset Mount
UTG 3-9x40 Scope w/ illumination
UTG single rail barrel rail
UTG Sniper Profile Bipod
Q-Loader (not as problematic as people say)

[TheDarkShadow]

that's one long ass setup

[PHR33Z0R]

Hers my gun:

RAP4 10" straight rifled barrel
RAP4 mp5 fore grip kit
RAP4 flash hider
Aluminum hopper clamp
viewloader electric hopper
Stock stock

[Stryker]

Hey, I'm brand new here (first post!) and after looking through most of this thread, I have some questions. After using my Spyder Victor II on and off for the past 6 years, I finally decided to upgrade, and after about 3-4 weeks of research I decided upon the Spyder MR1. Even before I bought it, I knew I would be upgrading it a LOT. The first upgrade that I've gotten so far is the Empire BT Apex 2 barrel (about 1.5 months of research there). So now for my questions...

Basically, I would like to know if the following upgrades that I plan on getting are the best available for a guy on a budget, if any important one's are missing or won't work/fit, or if any of them are just plain pointless. BTW, this marker will be primarily for woodsball and rec use, with the potential to turn me into a scenario player.

After anywhere from 5 days to 2 months of research, the upgrades I plan on getting include:

• ACP Spyder MR1/E-MR1 "Low Blow" Bolt
• ACP Spyder Slim Style Lightened Stainless Steel & Delrin Striker
• ACP Spyder Velocity Booster Kit
• ACP Spyder Delrin "Bullitt" Seals
• Kingman E-Trigger Frame w/ Tadao Spyder VS Marker Board & Tadao Spyder VS Chip Upgrade -OR- w/ Scenario Dreams Universal T-Board
• Custom Products Spyder VS1/VS2 Sling Trigger
• Warrior Paintball 9 Piece Spyder Spring Kit
• Lapco 12" Big Shot "Apex Ready" Barrel -OR- J&J Ceramic 14" Barrel w/ J&J Apex 2 Barrel Adapter
• Trinity MR T-Lock Clamping Feedneck -OR- RAP4 MR Clamping Feedneck -OR- Maddog Designz Spyder MR Clamping Feedneck
• Kingman Spyder MR Tactical Rail
• **NEW** Valken V-Max Paintball Loader (30+ BPS!)
• I also want to get a remote, but I've never used one, and I have no idea which one's are the best except from reviews. Here are some I found with good reviews: Custom Products Remote with ON/Off ASA, Guerrilla Air Carbon Fiber Compressed Air Tank W/ Myth Regulator 88/4500 & Cobra Remote Coil Hose, Ninja Remote Coil W/ Ninja Slide Check, and Warrior Paintball Nylon Remote Kit
• And (finally!) some gun oil/grease. Some of the one's I've looked at: Kingman Spyder Gun Oil, TechT Paintball Gun Sav Grease, and Remington Gun Oil

Any and all help is greatly appreciated!

Also, here's my current MR1 setup (obviously a work in progress, lol):

[TheDarkShadow]

That is one ugly loader, I'd personally go with something that is tried and tested like that rotor, and besides you will probably never need that much speed. also DO NOT use gun oil, it will deteriorate o-rings. any paintball gun oil is fine really. also, I'd switch to HPA if you haven't already

[Stryker]

Thanks! And yeah, I'm looking to go HPA, but I want a bigger tank, so I gotta save the green, haha.

[Nobodytoyou]

these are my babies

MR1 (a.k.a. Old reliable)
mods and additions
CCM Clamping feedneck
16" CP 1 piece barrel (0.689 bore)
Empire Prophecy Loader (with green accent kit on the back)
Spyder Skeleton Stock (with the top cut out and electrical tape wrapped around, it was a clean and smoothed cut , the part sticking is the tape starting to peel up , fixed it with some super glue though :P)
Kingman Rocking Frame 2.0, with a Virtue Spyder board (no eyes so capped at 25bps)
32* mangaport valve
shock tech spring kit (forgot the combo I'm currently using >.<)
GUERRILLA Air 62ci 3k HPA tank
Dye Sticky Grips
also a bottom line ASA adapter , cant remember the brand but needed it to mount my ASA to the rocking frame
and a remote line , again cant remember the brand but i have a long and short one depending on how i want to play

(already capable of operating under 400 psi , still need to get a reg though)
(and yes it shoots at 25bps without a hiccup to )

Electra 09 (a.k.a. backup)
Virtue Spyder board
Virtue Eyes
VL Force Loader (depending on what gun i use as my main i swap hoppers and let the guest use the other one)
Pure energy 38ci 3k HPA tank

(technically can fire as fast as its cyclic rate but i suck at walking its trigger XD)

[deano 177]

Man. its been a while....

Im rockin an ego 11 now...lol