Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 07-17-2012, 10:33 AM
FEZ1992 FEZ1992 is offline
New Guy
Join Date: Jul 2012
Posts: 2
Default My classic spyder is leaking air out the barrel

I just bought a classic spyder paintball gun the previous owner didn't really take much care of it friend of my help me clean it and change the o-rings... When I put a co2 tank on it it was leaking air out the barrel...i already had a Tippman A5 but never encountered this problem... I need some advice not sure how to fix this problem
My spyder looks similar to this one except the barrel is different and mine has a double trigger need all the help I can get to get my gun working at full potential
Reply With Quote
Old 07-17-2012, 06:19 PM
bigred76's Avatar
bigred76 bigred76 is offline
Resident *******
Join Date: Dec 2005
Location: San Jose, CA
Posts: 6,229
Default Re: My classic spyder is leaking air out the barrel

Change out the cupseal and make sure you didn't shred the front valve oring. The cupseal is most likely the case, and I would attempt to replace it before checking the valve orings. The cupseal could be damaged and you can't even really see where. After replacing the cupseal and reassembling: put a drop or two of oil into the ASA, cock the bolt, screw on the tank, and dry fire the marker without barrel or hopper in a safe direction. If it's still leaking after that... check the valve orings.
SOC (+41, -0) | PBN (+12, -0) | New PBN (+20, -0)

URT... Ultimate Resource Thread!

The [OFFICIAL] Manual Thread!

BigRed Photography

Originally Posted by Muddy Taco
ya my vagina hurts sometimes to
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 02:43 AM.