Spyder Forums  

Go Back   Spyder Forums > Shop Talk - Reviews - Polls > Shop Talk > Custom Shop
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 07-03-2011, 07:41 PM
rayray88's Avatar
rayray88 rayray88 is offline
Join Date: Jul 2009
Location: HIlife
Posts: 91
Default Trilogy Valve Stem Help

So I'm currently wanting to do the spyder pump conversion. I order a Trilogy valve stem as per the advice given in a lot of tutorials. However, I just got it in a couple days ago and I finally had time to disassemble a marker today. I looked at the valve, then looked at the Trilogy valve stem then back at the valve again. I thought to myself the Trilogy valve stem seemed too small. So I stuck it in and sure enough it was too skinny. The point of the Trilogy valve stem is to disable the blowback, right? Surely air would get past here. I took pics to show you guys. I bought the part from here Did I receive the wrong part? Or has the part changed?
The original valve and stem

The Trilogy valve stem and Spyder valve
Spyder MR1/M4

Spyder MR1
Spyder Classic Single Trigger Frame
M16/AR15 Carry Handle
PCS MX-16 Barrel and Shroud
Rap4 Clamping Feedneck
6 Point Collapsible Stock
M16/AR15 Recoil Pad
M16/AR15 30rd Magazine
Custom Milled Side Cocking Slot by ACP
ACP Slim Delrin Striker with Side Cocking Hole
Spyder Classic Side Cocking Knob
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 12:58 PM.