Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2006, 05:05 PM
Pyro Pyro is offline
New Guy
 
Join Date: Dec 2006
Posts: 2
Default Need Some Help Here!!!

I just recently got a Spider Pilot on ebay. I shot it a couple times and it was pretty sweet. However, Later on, I have incountered Numerous Problems.

1. I can't seem to figure out how to switch the mode to 3 burst 6 burst or Auto

(2, 3, and 4 happened yesterday and today)

2. (this might be because of the cold weather) I tried screwing on the co2 tank like usual, and all of a sudden co2 was majorly leaking out of the expansion chanber!!!

3. I tightened the Expansion chamber, it leaked out a little, then it stopped. I shot a couple paintballs, but the problem is is that it shot every other time it (it wasn't chopping) it sounded like ::click boom click click click click boom:: (clicks being the gun not firing, and boom being the gun fireing) I have a suspision that the co2 tank might be running empty.

4. After a couple of hours of letting it sit (to see if it got any better or not) i tried screwing on the co2 tank again, this time it just started bursting out of the little hole in the screw hole that you screw the co2 tank in. (you know when you unscrew the co2 tank it lets out some co2 as your unscrewing it, That is what it was doing, except i was screwing it in)

So please tell me if it's just that i need more co2, or if it's something help. Any help will be greatly appreciated, just be sure to be spicific and also know that i'm not very paintball esque (however you spell it) so be sure to use common paintball gun terms (or explain what certain things are) Thank you very much.

-Pyro
Reply With Quote
  #2  
Old 12-03-2006, 05:17 PM
Halucin8's Avatar
Halucin8 Halucin8 is offline
Halucin8ns
 
Join Date: May 2006
Location: North Carolina
Posts: 453
Default Re: Need Some Help Here!!!

1. just push the buton on the abck of the grip after you switch it on.
2. may need new orings or atleast taken apart and clean and lube and make sure everythign is tight
3.sounds like a low battery. recharge battery and try again.
4.bottle oring is bad change oring and try again.
__________________
Dragun T-1-clamping feedneck,Torp hpr,Micro-Rock LPR.
Pilot ACS-Low-Blow bolt,cocker feedneck,T-1 Hpr, turbo valve,polished
DragunFly-T-1 LPR,T-1 HPR
Dragunfire-TES Hpr,Polished
Rebel-Half-backed(by me)
E99
Xraider
Black LCD Fasta
Feedback
Reply With Quote
  #3  
Old 12-03-2006, 05:53 PM
peeps's Avatar
peeps peeps is offline
New Guy
 
Join Date: Nov 2006
Posts: 6
Default Re: Need Some Help Here!!!

If pushing the button on the back of the gun doesnt work, then the problem lies inside.
Take off your handle grip on the side of the display. Beside the display on the battery side there should be a little red piece of plastic standing vertically. It is even with the 12 and 13 on the display. If that piece of plastic is not there and there are two exposed metal rods or if the plastic is not pushed down completely on the rods, then that is probably what is causing your problem. If the piece is missing just lift your battery out and see if it is in the handle somewhere, mine has come loose before and done that.
Reply With Quote
  #4  
Old 12-04-2006, 11:52 AM
Pyro Pyro is offline
New Guy
 
Join Date: Dec 2006
Posts: 2
Default Re: Need Some Help Here!!!

hey thanks guys. I think that all it needed is a new o-ring on the co2 tank and some more co2 ^_^''. So far, i put a new O-ring on it, it's no longer leaking anywhere, and it shoots the balls like 2 ft. currently. So i should go to my local co2 provider and fill it up, and see what happens then. Thank you guys for you help and support.
Reply With Quote
  #5  
Old 12-04-2006, 01:51 PM
Hob Hayward's Avatar
Hob Hayward Hob Hayward is offline
not a nublet, sheesh.
 
Join Date: Feb 2006
Location: MA
Posts: 2,848
Default Re: Need Some Help Here!!!

Battery might be low aswell. That would be the cause of it clicking and not firing.
__________________
05 Imagine
Palmer stabilizer
Maddman Rocket valve
Trinity Front block
IPS Sunbear Bolt
Dark Horizon titanium striker

Green/silver VSC CCI Phantom

Red/Black PMR SE
Reply With Quote
  #6  
Old 12-05-2006, 04:55 PM
AcsPilot326 AcsPilot326 is offline
New Guy
 
Join Date: Dec 2006
Posts: 11
Default Re: Need Some Help Here!!!

i would charge ur battery this happend to me last week
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 04:30 AM.