|
|
#21
10-15-2006, 06:21 AM
|
||||
|
||||
Re: Screw size list...LOOK HERE FIRST!!
What size are the bolts that hold the air-thru foregrip on for the MR1?
|
|
#22
12-08-2006, 06:46 PM
|
|||
|
|||
Re: Screw size list...LOOK HERE FIRST!!
I need threading for LPC's, should be the same on all of them.
-Rob.
|
|
#23
05-07-2007, 02:37 PM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
I need to know how to read the metric threads XP the em1 uses 3.5x12 for the frame, and i need some screws about twice as long. would that be 3.5x24 then?
__________________
Quote:
My Feedback! (+9/-0) ಠ_ಠ
|
|
#24
09-13-2007, 01:25 PM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
here's one: the size of the screw/pin that keeps the velocity adjuster from going in too far. im guessing that kingmans been consistant with their products over the years, but if not, im specifically looking for the one for the original Imagine.
edit: heres another one: the thread for the bottom of the old (Imagine, Xtra, E99) expansion chambers, which would be the same as the Spyder drop foreward (small) ASAs (which arent 1/8th NPT), which is the same as the non-NPT side of the stock spyder hose...
__________________
8/23/03 OS KUSA #10898
Spyder to pump conversion tutorial! Project LP Reposted! Sales Thread Feedback Quote:
- from Ray Bradbury's Something Wicked this Way Comes Last edited by DFSniper : 09-13-2007 at 05:51 PM.
|
|
#25
09-13-2007, 01:42 PM
|
|||
|
|||
|
Re: Screw size list...LOOK HERE FIRST!!
how bout e99 avant feedneck screws
|
|
#26
03-29-2008, 04:21 PM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
sorry to revive an old thread, but what size are the ciruit board mounting screws in a Pilot ACS?
__________________
Omega Ra Uber Spyder Pilot Video DH titanium striker, 32* spring kit, Dye hyper 3 reg, ccm no-rise feedneck, X-customs Hall FX kit & NV trigger, ACP bolt, trinity 15* frontblock, NDZ asa/rail, SP all american barrel, T-board Ver C, 32* mangaport valve & pin, blue laser eyes, trinity grips, dye membrane pad Originally posted by OneUp: the reason I rock a spyder is because I have a big enough **** to not need even a $300 gun to compensate, let alone a $1000 gun....
|
|
#27
04-01-2008, 01:55 PM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
its not old, its stickied!
i had a question, but it escapes me ATM...
__________________
8/23/03 OS KUSA #10898
Spyder to pump conversion tutorial! Project LP Reposted! Sales Thread Feedback Quote:
- from Ray Bradbury's Something Wicked this Way Comes
|
|
#28
11-13-2008, 09:03 PM
|
|||
|
|||
Re: Screw size list...LOOK HERE FIRST!!
tnx man i was almost goin nuts tryyin to find the screw size for the victor 2 frame cuz idk why the hell the screws on it are allen screws and they keep gettion round idk why the allen key just stops holdin on to the screw and i can take em out lolz but tnx dude really apreciated
 
|
|
#29
11-14-2008, 09:13 AM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
What about the EYE cover screws for the Spyder VS2/VS3?
|
|
#30
11-14-2008, 09:15 AM
|
||||
|
||||
|
Re: Screw size list...LOOK HERE FIRST!!
Hey, what about the EYE cover screws on the Spyder VS2/VS3...?
Opps didn't mean to post twice ... 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
