Spyder Forums  

Go Back   Spyder Forums > Shop Talk - Reviews - Polls > Shop Talk > Custom Shop
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 09-29-2006, 06:39 PM
NoRcO_bOi NoRcO_bOi is offline
New Guy
 
Join Date: Aug 2006
Posts: 24
Default Polishing internals/ bolts?

How do you polish internals? what does it do to the gun also?
Reply With Quote
  #2  
Old 09-30-2006, 01:37 AM
MonkeyWiz's Avatar
MonkeyWiz MonkeyWiz is offline
Coffe sponge
 
Join Date: Jan 2006
Location: Sweden
Posts: 186
Default Re: Polishing internals/ bolts?

http://www.spyder.tv/forums/showthread.php?t=75
__________________
Bare with me and my spelling, English is not my native language...
Put the Scandinavian players on the map
>> PaintballFinder
The #1 Swedish paintball forum >> Paintball.se

A Spyder Victor is born >> The Paintball Blog
Reply With Quote
  #3  
Old 09-30-2006, 02:16 AM
vikingshadow's Avatar
vikingshadow vikingshadow is offline
Ah-roo! Ah-roo! Ah-roo!
 
Join Date: Dec 2005
Location: Where my stuff is. Duh!
Posts: 6,950
Default Re: Polishing internals/ bolts?

This is the way I do it - takes about 30 minutes TOPS for the whole process. I'll get pictures later when my family is awake to make it more clear for you.

You will need:

* internals - striker and bolt (duh!)
* sandpaper - I use 600 grit and 800 grit for this
* electric screwdriver
* something that will fit into the screwdriver AND the end of the bolt and striker. I used a wooden dowel rod.
* dremel
* polishing bit
* Polish - I use Mother's Mag Aluminum polish
* soft cloth

1. Remove the internals from your gun.

2. Remove any o rings on the internals.

3. Attach the striker to an electric screwdriver (if you have one - makes it a lot easier and goes a LOT faster!)

4. Cut a strip of 600 grit sandpaper and wrap it around the striker.

5. Turn on the screwdriver and as the striker is spinning, apply pressure to the sandpaper. Do this up and down the striker until it is shiny and smooth. NOTE * You only have to do the part of the striker that will touch the body of the gun - you don't have to do the angled part. It also helps if you are watching television - I watched PB2X while I did mine - was finished with the entire thing by the end of the show.

6. Cut a strip of 800/1000 grit sandpaper. Repeat procedure until striker is shiny.

7. Remove striker from electric screwdriver.

8. Coat the striker in aluminum polish - I use Mother's Mag polish.

9. Using the dremel and a polishing bit, buff the striker until it's mirror shiny.

10. Repeat the procedure with the bolt.
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 05:06 PM.