Alternative Feedneck Almost Ready!

[Spoolinup]

Thanks SPPS, look forward to seeing/purchasing one!

[wylde01]

sweet im also looking foward to getting one of those

[SundragonPPS]

got the ok from the honcho to post some pics so you can check it out. remember, this is a prototype and the finished product will be matt black. he's having the others anodized this week and will send me an anodized version some time this week.



it is a short flanged 45* adapter with a 90* turn that will accept any impulse/shocker/ion feedneck. it's the only way this could be made possible.





the milling is excellent and it actually pulls the hopper more towards the center of gravity of the marker. a great improvement from the cheap plastic adapter that comes with the marker. this one isn't going to crack.





all you'll need to do is get an impulse/shocker/ion feedneck(all have the same thread), put a few drops of red loctite on the threads, screw it in and let it cure for 24 hours. you can use a low rise, no-pro or stock feedneck from any of these markers. we chose these threads because they are one of the most common available. i'm really impressed with the results. after testing it may take up to a few weeks before the first run is completed. in the mean time reserve orders may be taken. hope you all like the results of this collaboration. it's been in the making for a couple months now.

[NextoN]

Damn Nice Unbelivable

[Spy-Der]

I'd like to pre-order one. Should I email you or could you put me down for one right now?

[Guitar_kid99]

yeah i would like to pre order one too

[Spoolinup]

SPPS, do they make a variation for the MR3, as my gun has eyes, and the feedneck from the MR3 has extra material on the bottom side for covering of the eye, so the eye cover is actually part of the feedneck. I was *lucky* enough to get the prototype eye covers for my MR2 when I talked to Kingman for suggestions before the MR3 was announced or known to come out. Turns out the MR3's that can be bought now have the same exact eye covers I have.

Thanks!!!


VERRRRRRY interested!!!!

NIck

[new_Faction64]

SWEEEEEEEEEEEETT!!

Thanks so much SPPS, I'm phsyced for this!


Which type would of rise would "stock" be? I'm seeing stuff like mid-rise, low-rise, no-rise, and no-pro.

Which feedneck type is pictured?

[velocity]

Need any beta / product testers for the new feed neck?

[DRAGON]

Originally Posted by new_Faction64

.............Which type would of rise would "stock" be? I'm seeing stuff like mid-rise, low-rise, no-rise, and no-pro.

Which feedneck type is pictured?

The ones in the pics look like the no rises I have on a couple of my markers. No pro's are 1/2 as tall as shown. I think by stock he prolly means the ones that come with the markers he mentioned the threads were for. These look nice -