Egg help

[SnOoZ]

can some1 tell me how to take the door off my egg im not sure if its called the door but owell

[Team Ramrod]

the lid? undo the screws and kinda 'pop' off the door. there are little 'hole' where the screws go, it just kinda pops off there.

[leed]

Do what Team RamRod said, if you're talking about the lid. If you're talking about the Battery Door, push it down, and slide it back, and pop it off. If you want to take it off, you have to unscrew the shells, then take it out.

[Drefish99]

Just be careful. Egg shells aren't the mose durable. I have found the battery and loading doors to be really easy to break.

[SnOoZ]

the lid is what i mean but there isnt any screws holding it in there like little plastic stars kinda ive tried pushing them out but it just dosnt come out

[DRAGON]

Pics? -

[Starbucks Larry]

it's the new egg style, PM vike, he has the new style I think?

[druid]

loading gate - remove 2 screws and plastic buttons, grasp gate and flex so that the tab with hole comes off the screw post

battery door...slide like a tv remote battery door, drop, twist and remove. Some of the newer ones won't let you twist it out...loosen shell halves.

[leed]

If they look black on the outside of the lid, then I know what you're talking about. Open the lid, if you have finger nails, push in the center pin (from the inside) using your fingernail, or use a Flat-head screwdriver, and they should pop somewhat out, then just pull those out, then pull out the rest of the black piece. The two pieces both come out on the same side. When you push them out, you have to push in between the 4 little claw type thingers.

[thechubbss12]

Yes and just a note becareful not to bend the little star pieces on the push pins (things that hold the lid on). Unfortunatly i did that and had to do some hacking of the pins just to get emm back in.