trigger help

[Guitar_kid99]

how do you adjust the trigger so it has less pull

[wylde01]

take your little allen wrench and go clockwise on the screw on the trigger untill you get it to where it feels good to you

[Guitar_kid99]

the hole closest to the trigger doesnt have a screw do i need to order one from knigman?

[wylde01]

hey when you look at your trigger on the top part of it there should be a hole where you can put your allen wrench.......if not then you got seriously ripped off!

[Guitar_kid99]

oh wait i found it thanx

[wylde01]

no problamo

[SpyderFan]

do you have to take the whole frame off the gun to that? i cant find any exposed allen scew, except for hte ones to take the frame off.

[breakxeggs]

its set in you see the hole and just put your allen wrench in it. But its only for e-markers mechanical guns like the MR1 can't adjust their trigger.

[Highbinder]

Yeah, you tighten the allen bolt that is in the hole recess above the trigger to reduce the travel needed to make it fire. Careful not to tighten it too much or you may get the bouncing symptom mentioned in another thread. Also, it is possible to tighten it so much that you are already passed the firing point.
Just pull the trigger with the gun off while you are adjusting it and listen for the little "click." That is the point at wich your gun would fire.