Spyder Forums  

Go Back   Spyder Forums > General Spyder Discussion > Veteran Forum
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-11-2006, 07:27 PM
emf7301 emf7301 is offline
Member
 
Join Date: Mar 2006
Posts: 346
Default LP setup

Ok, i am choosing out my parts for going low pressure with my pilot acs and i would just like a little advice.
  • CIP 15*
  • New Designz HP Valve
  • Macroline
  • Either Torp or Detonator Reg
  • 32* spring kit
  • Other misc. fittings and stuff

Which reg do you think is better? I will for the most part be only using air on it but i might occassionally have to use co2. I know the torp can handle co2 and is easier to take apart and clean but i don't like the side input but am willing to put up with it since my pilot's foregrip has it on the side also. The detonator has a bottom input and is very consistent once broken in but as far as i know it can't handle co2 well and is a little difficult to take apart.

Don't even mention the palmer unless you know where i can get it for $50.
Reply With Quote
  #2  
Old 05-11-2006, 07:29 PM
ricochet08's Avatar
ricochet08 ricochet08 is offline
Spyder Addict
 
Join Date: Dec 2005
Posts: 817
Default Re: LP setup

hmmm....well...i don't know much about the Detonator reg, but i love my Torp reg

and for the NDZ hp valve...make sure the o-rings are good trust me.

also, i saw a palmer stableizer on pbnation for $45, but that was near a week ago just look around, and i'll keep my eyes open
__________________
*****May 2006 Spyder of the month winner!!!*****

feedback: http://www.spyder.tv/forums/showthread.php?t=819
Reply With Quote
  #3  
Old 05-12-2006, 05:44 PM
Prospekt's Avatar
Prospekt Prospekt is offline
AKA the Herculine Hero
 
Join Date: Apr 2006
Location: Ontario, Canada
Posts: 29
Default Re: LP setup

Hmm, you're using an HP valve for a LP setup? HP means high pressure you know. Or is there a method to your madness...
__________________
- Prospekt

I wish I had a karnivor.
Reply With Quote
  #4  
Old 05-12-2006, 06:21 PM
emf7301 emf7301 is offline
Member
 
Join Date: Mar 2006
Posts: 346
Default Re: LP setup

no, NDZ puts HP but it means High Performance not high pressure. i first thought that too when i saw it.
Reply With Quote
  #5  
Old 05-12-2006, 06:38 PM
ricochet08's Avatar
ricochet08 ricochet08 is offline
Spyder Addict
 
Join Date: Dec 2005
Posts: 817
Default Re: LP setup

lol yea HP means High Performance when it comes to the NDZ valve.

it increases the airflow to help with your LP (low pressure) operation. as im sure u've read that

i have one in my marker and i love it now
__________________
*****May 2006 Spyder of the month winner!!!*****

feedback: http://www.spyder.tv/forums/showthread.php?t=819
Reply With Quote
  #6  
Old 05-14-2006, 05:54 AM
Spinal's Avatar
Spinal Spinal is offline
NDZ ftw
 
Join Date: Jan 2006
Location: Toronto, Ontario
Posts: 162
Default Re: LP setup

a lot of people get the torpedo reg, and i'd say get the torpdeo as well, bob long makes quality stuff.
__________________
Fully Upped Spyder Pilot|Macdev 68/45|DXS Pulse|Empire 7pc Barrel Kit
The gun
Update Dec17-Take-a-part your 05' Pilot guide
Reply With Quote
  #7  
Old 05-14-2006, 06:33 AM
druid's Avatar
druid druid is offline
Mo Anam Cara (friend of my soul)
 
Join Date: Dec 2005
Location: hiding behind my 114/45 :D
Posts: 3,547
Default Re: LP setup

torp reg and ditch your ACS bolt because once you get it all together, you'll be back on here wanting to know why it won't recock. Then I will flame you

ACS bolt+LP=problems. Get a high flow bolt like a sunbear or a lightening
Reply With Quote
  #8  
Old 05-14-2006, 10:44 AM
ooglieboogliebob ooglieboogliebob is offline
Marine Corps.
 
Join Date: Dec 2005
Location: Pasadena, MD
Posts: 2,565
Default Re: LP setup

Druid stated a pretty important point ...
Try maybe just getting an otterized stock bolt if it doesn't fit your budget ... but the sunbear bolt, aka lightning, or the ..... (just left my mind) .... bolts are high flowing .. and it'll eliminate blowback/highflowing which means a better LP setup

As for the reg .. i'd go for the torp ... the evil detonator really can't stand co2 well .. if your using that .. besides that .. doesn't really function that well... but it isn't hard to take apart ... either reg isn't ...

Torp i can find on PBnation easily for 25 - 30 bucks ... (remember to get dow 33 as well ... unless you want creeping/inconsistancy; hobbyhorse sells it for 4 dollars)

Goodluck
Reply With Quote
  #9  
Old 05-14-2006, 04:43 PM
Prospekt's Avatar
Prospekt Prospekt is offline
AKA the Herculine Hero
 
Join Date: Apr 2006
Location: Ontario, Canada
Posts: 29
Default Re: LP setup

Lol, I never read the whole part about the ACS bolt (mine isnt recocking with lp). Guess I should go and pull out the venturi on my stock one then.
__________________
- Prospekt

I wish I had a karnivor.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:07 PM.