Vertical adapter o-rings

[divvichild]

ok, so i came home today after paintballing and i took my gun apart for cleaning. when i began to remove the vertical adapter, the o-rings burst and came flying through the screw hole. I just need to know if i can replace them with a tank o-ring since i have a ton of those.

[NB_Hacker_NB]

They may be a little hard to put on, but once they are stretched a little, they'll be fine.

[SparkyGT]

sounds like ya still had pressure in the gun, did ya dryfire till it was out?

[tex]

Tank o-rings will work on just about any seal except the hammer.

[ooglieboogliebob]

actually ... they probably'll seal all of them ... but i'd probably not recommend it ... just get some o-rings at your local hardware store ... way cheaper

[ad0131065]

Originally Posted by ooglieboogliebob

actually ... they probably'll seal all of them ... but i'd probably not recommend it ... just get some o-rings at your local hardware store ... way cheaper

yea they're like 25 cent at home depot

[divvichild]

yeh, i dry fired it till it was out. the o-rings worked fine, i thought they would since they're the same size as every other o-ring except the striker.

[ooglieboogliebob]

eh ... then i guess you can use them ... i'd rather go to the hardware store and buy those o-rings though .. WAY cheaper ....