Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 03-15-2012, 06:01 PM
Sabbath Sabbath is offline
New Guy
 
Join Date: Mar 2012
Posts: 2
Default Spyder flash

I've been working on a spyder flash that I bought off craig list and when I was assembling it, I noticed that CO2 was beginning to leak. My first instinct that the O ring's were bad, so I went out and bought some new O ring and replaced all the ones I could. The problem is, it is still leaking! I attempt to put the CO2 tank and it only up till the CO2 meets the gun that it begins to leak(Around the handle were the grip is). I'm at a lose here! I hardly know anything about fixing these things so I don't want to go into opening it to much but I just don't have the time to go up to a paint ball repair shop due to work and just the sheer distance.

Any ideas?
TL;DR My Spyder flash was something I bought on Craiglist. I replaced the O ring due to a leak. The leak is not gone still and it is originating near the top where the handle(The bars that cover the CO2 feed line). Don't have the time to go up to a paint ball repair shop due to work with the busy spring days.
Reply With Quote
  #2  
Old 05-12-2013, 03:55 PM
DriverJ DriverJ is offline
Captain of Team Specter > The Reapers Hand
 
Join Date: Feb 2007
Location: Minnesota
Posts: 221
Default Re: Spyder flash

My guess would be either damage to the steel braided line or the line is not completely sealing against the marker. Try adding a bit of teflon tape to the threads of the hose. (just a very little)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 10:53 PM.