Spyder Forums  

Go Back   Spyder Forums > General Spyder Discussion > General Spyder Forum
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 07-12-2011, 07:42 AM
Jman21 Jman21 is offline
New Guy
 
Join Date: Jul 2011
Posts: 4
Default spyder mr2 issues

i have a mr2 and never use it. I pulled it out yesterday and it wont fire. electronic trigger works on all 3 modes. when a co2 is connected it just spits the ball out and you have to re-cock the lever, tried on 3 different tanks. I know the tanks are good, we tried them on a different gun. i took it apart and didnt see anything blocking. any ides or could i have missed something
Reply With Quote
  #2  
Old 07-12-2011, 10:06 AM
Talon's Avatar
Talon Talon is offline
dorito man
 
Join Date: Aug 2007
Location: Auburn NY
Posts: 152
Default Re: spyder mr2 issues

Sounds like an air problem. I would start with the striker o-ring, change that out and oil it. Then check and see if it works.
__________________
Quote:
PB Nation feedback-
http://www.pbnation.com/feedback.php?u=393671
Reply With Quote
  #3  
Old 07-12-2011, 11:16 AM
Jman21 Jman21 is offline
New Guy
 
Join Date: Jul 2011
Posts: 4
Default Re: spyder mr2 issues

Were do I find the ring at, I dont know much about the gun
Reply With Quote
  #4  
Old 07-12-2011, 11:57 AM
shunut's Avatar
shunut shunut is offline

Respected, period.
 
Join Date: Dec 2005
Location: Gilbert, AZ
Posts: 5,357
Default Re: spyder mr2 issues

Definitely an air problem, sounds like you aren't getting enough pressure. Is the tank new/recently filled? Have you ever taken the gun completely apart (I ask this because it could have been put back together incorrectly)?
__________________
Viva La KUSA!

KUSA Feedback

2006 Non-Spyder of the Year - The Shunut Spimmy


Shunut Creations
Reply With Quote
  #5  
Old 07-12-2011, 02:40 PM
Talon's Avatar
Talon Talon is offline
dorito man
 
Join Date: Aug 2007
Location: Auburn NY
Posts: 152
Default Re: spyder mr2 issues

I would first try to find an O-ring at your local paintball field. If you can't get to a paintball field. Go here, this will is a complete o-ring rebuild kit.
http://www.orings-online.net/index.p...duct s_id=294
__________________
Quote:
PB Nation feedback-
http://www.pbnation.com/feedback.php?u=393671
Reply With Quote
  #6  
Old 07-12-2011, 07:33 PM
Jman21 Jman21 is offline
New Guy
 
Join Date: Jul 2011
Posts: 4
Default Re: spyder mr2 issues

Quote:
Originally Posted by shunut View Post
Definitely an air problem, sounds like you aren't getting enough pressure. Is the tank new/recently filled? Have you ever taken the gun completely apart (I ask this because it could have been put back together incorrectly)?
yea I got it refilled so it is completely full, when the tank is one another gun, the other gun fires with no problem
Reply With Quote
  #7  
Old 07-12-2011, 07:36 PM
Jman21 Jman21 is offline
New Guy
 
Join Date: Jul 2011
Posts: 4
Default Re: spyder mr2 issues

oh and no its never been taken apart, i took it apart today too see if there was a clog in the line other than that no. its aggravating cause i never use it. i will say i left the tank on for a little while, could that have caused something
Reply With Quote
  #8  
Old 07-12-2011, 07:48 PM
shunut's Avatar
shunut shunut is offline

Respected, period.
 
Join Date: Dec 2005
Location: Gilbert, AZ
Posts: 5,357
Default Re: spyder mr2 issues

Leaving the tank shouldn't cause the problem you're having. Try lubing all moving parts, valve pin, striker and bolt. Also, once in a while some how, the bolt gets put in upside down, its happened to me, so make sure that the opening on the side of the bolt is facing down.
__________________
Viva La KUSA!

KUSA Feedback

2006 Non-Spyder of the Year - The Shunut Spimmy


Shunut Creations
Reply With Quote
  #9  
Old 10-03-2011, 01:16 PM
Atwaterpaintball.com Atwaterpaintball.com is offline
New Guy
 
Join Date: Sep 2011
Location: Merced
Posts: 4
Default Re: spyder mr2 issues

You can go on youtube to look on how to take the paintball gun appart. it may not be the exact one. It could be o-rings that may be bad depending on your gun. it can have up to 5-8 o-rings. Check out .
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 12:49 AM.