Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Electronic Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 07-10-2011, 03:50 PM
junits15 junits15 is offline
Member
 
Join Date: Dec 2010
Posts: 38
Default low pressure

So Im bored and I want to experiment with low pressure. I have an 09 pilot, so There are a few things I've been wondering about.
1. Is this possible even though the pilot has no LPC?
2. I need a new valve, should I go with the rocket valve or just the 32 degrees one thats still floating around?
3. do CP regs have enough flow to make this work?
4. is it possible to get an LPC on a pilot?
5. will i need a higher flowing asa?

thats all i was wondering, Ive seen many LP spyders but they all have a front block with an LPC, thats the main thing thats holding me back right now.

Thank you!!
Reply With Quote
  #2  
Old 07-10-2011, 05:21 PM
Lawpass Lawpass is offline
Member
 
Join Date: Nov 2008
Posts: 115
Default Re: low pressure

How low are you thinking? The 09 electra its basically the pilot with a regulator and runs somewhere around 300psi. Hmm... I think the values are the same, any know if they are?
Reply With Quote
  #3  
Old 07-10-2011, 05:43 PM
junits15 junits15 is offline
Member
 
Join Date: Dec 2010
Posts: 38
Default Re: low pressure

Not sure, as low as I can get it to go. Doesn't the Electra have a different valve? I can't remember what it was called and since its no longer on spyder's site I cant check. From the looks of the diagrams in the manual its the same, its even got the same part #. I might just try it on 300 PSI with no mods and see what happens. Odds are that I'll still need a spring kit.

EDIT they called it synergy engineering dual air source something or another

Last edited by junits15 : 07-10-2011 at 06:09 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 01:44 AM.