|
|
#1
10-18-2010, 09:13 AM
|
||||
|
||||
PM7 problems
I just got my new pm7 and ( new to me ) i get a green light but no fire if i pull the trigger it goes to red the orange then flashing orange then green and continues in that sequence? Any help ?
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant" 
|
|
#3
10-18-2010, 09:25 AM
|
||||
|
||||
|
Re: PM7 problems
yea came with dead battery brand new one had hopper full on and air hooked up air feed screwed all the way in
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant"
|
|
#4
10-18-2010, 09:26 AM
|
||||
|
||||
|
Re: PM7 problems
did you try it with the eyes off?
|
|
#5
10-18-2010, 09:26 AM
|
||||
|
||||
|
Re: PM7 problems
dye just said im on configuration mode to download pdf manual and go to work lol we will see
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant"
|
|
#6
10-18-2010, 01:19 PM
|
||||
|
||||
|
Re: PM7 problems
got that thing shootin ropes wow what a nice smooth gun but the frame is bigger than the spyder xtra def gonna have to get ul frame.
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant"
|
|
#7
10-19-2010, 06:19 AM
|
||||
|
||||
|
Re: PM7 problems
The gun is now breaking alot of balls and its showing eye failure after cleaning them throughly ( removing covers and cleaning holes and eyes and breach new detents ) it still would break one and give me the eye failure flashing green light.
do the virtue eyes work with the stock board? There is also a small spot of hardnend material in the bottom of the breach its ano but kinda sharp should i file this out and make it smooth? ( i dont break paint with gravity feed but with either a the pulse or evo 3 i break paint )
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant"
|
|
#8
10-19-2010, 07:03 AM
|
||||
|
||||
|
Re: PM7 problems
Sounds like either:
1. detents are worn and paint is getting pushed passed them making it chop 2. LPR pressure is to high 3. board settings are off and it chops at higher rates of fire Virtue eyes will work with stock board, there the same they just light up.
__________________
www.dliveleyphotography.com  Back to gun whoring..... armedfuture (8:12:32 PM): I'm a big angel paintball6684 (8:16:09 PM): more like out of control, raging ginger armedfuture (8:16:40 PM): noooooooo...........
|
|
#9
10-19-2010, 08:41 AM
|
||||
|
||||
|
Re: PM7 problems
well i just put new detents in one was worn and other was pretty good and played with the lpr some. what do you mean with board settings off? eyes are on and board is set 1 up 2 down normal mode
__________________
The price of victory is high, but so are the rewards. "Paul W. Bryant"
|
|
#10
10-19-2010, 09:05 AM
|
||||
|
||||
|
Re: PM7 problems
whats the dwell set at?
And to tune LPR, turn it all the way to zero and then slowly bring it out till the gun starts to shoot. Once the bolt cycles turn it a extra 1/4 turn and see if it works ok at higher rates of fire. If if starts to sound like its not getting enough air give it a extra 1/4 turn.
__________________
www.dliveleyphotography.com Back to gun whoring..... armedfuture (8:12:32 PM): I'm a big angel paintball6684 (8:16:09 PM): more like out of control, raging ginger armedfuture (8:16:40 PM): noooooooo...........
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
