MR1 wooden grips

[paintballkid0206]

i also like the forestock

[jvaughn94]

mine are close to being finished...

[sonik]

^^ Nice! I streamlined mine a little more on the front side.

[jvaughn94]

Yeah i just used the old ones as templates...now i just need to find some screws cause somebody lost mine

[OneShotKill]

dang sonik, how many spyders do you own???

but in seriousness, the grips look great...just wait 'til you see my finished mr2...I made grips for it too..

Originally Posted by jvaughn94

Yeah i just used the old ones as templates...now i just need to find some screws cause somebody lost mine

if they are the same as the mr2, they are 4mm diameter with a .7 pitch, and are 1/4" long (I believe)...you should be able to go to a hardware store and pick 'em up, I did (for my mr2)...

[sonik]

4 spyders... 3 MR1s (one I gave to my bro, 1 you can see and one is in pieces while I fix the valve on it.) and an MR2
1 A5
1 Bushmaster SI
1 Brass eagle pump... from a waaaaay back in time. I can still drop a ball on my target from about 100 yards with it. simple but effective

[jvaughn94]

yeah the screws i found were .50 pitch and M3 X 12 and they fit perfectly...they had to be a bit longer cause the grips are gonna be thicker than the original ones.

[OneShotKill]

Originally Posted by sonik

4 spyders... 3 MR1s (one I gave to my bro, 1 you can see and one is in pieces while I fix the valve on it.) and an MR2
1 A5
1 Bushmaster SI
1 Brass eagle pump... from a waaaaay back in time. I can still drop a ball on my target from about 200 yards with it. simple but effective

then theres your tippy's....

Originally Posted by jvaughn94

yeah the screws i found were .50 pitch and M3 X 12 and they fit perfectly...they had to be a bit longer cause the grips are gonna be thicker than the original ones.

ya...i dont even know what the pitch means...the size i posted are just the ones I bought at the hardware store for my mr2 that worked, so...

[sonik]

Pitch is the angle or slope of the thread. A coarse screw will have a steeper pitch than a fine thread screw.

Originally Posted by OneShotKill

ya...i dont even know what the pitch means...the size i posted are just the ones I bought at the hardware store for my mr2 that worked, so...