Should I buy a new stock pilot board....

[londberg57]

u think that will fix everything I can get a brand new one for like 10 dollars

i got a 9.6V and it wont fire it will fire once then turn off. It also wont keep the lights on

[DFSniper]

sounds like the battery wont charge.

[londberg57]

yeah its the battery i put in a 9V and it fired about 50 shots


thanks

[davmitchell77]

plug your wall adapter into the marker, and check the current at the battery plug. you should have 10.2 volts, 40 milli amps. you can get away with anything over 9.6 volts, but the transformer is 10 volt. if you don't have the right charge, or no charge, wiggle the jack (the plug for the marker grip) while you watch the multimeter. if the jack is loose, or the pin is bent, you will see the reading change as you wiggle. you can read the transformer output directly, to check its output, positive is in the end, and negative is the outer sleeve. if all that checks out, then the battery is definately the culprit, dav

[shawn22stl]

Those stock handles are known for going down. My first pilot e frame went down on me so i just went ahead and replaced with a rockin trigger kit. Try going to local pawn shop, as i have seen many spyder eframe for cheap there plus you get rest of the gun as well. If you try to fix your stock frame good chance your wasting your money on parts that may or may not fix your problem. Calling kingman may also be a good bet for you. Ive had good experience when contacting them about some of my problems.