![]() |
#1
|
|||
|
|||
![]() There are 2 o-rings on it that are #015 80D. I put on new ones and it leaks a lot, the #09 rings. The old ones were all cracked. Is the part defective? it was working for some time. the gun is 3years old only use 5 times
![]() ![]() |
#2
|
||||
|
||||
![]() on the outer most o-ring, replace that with a tank o-ring
on the inner o-ring i recommend saving you tank o-rings and just buying a faucet oring from the hardware store. oh o-rings dry up and need to be lubed up or replaced to continue to hold a seal. I suggest you buy some paintball oil and re-lube your entire gun accordingly so its ready to go with out the worry of it breaking. |
![]() |
Thread Tools | |
Display Modes | |
|
|