Virtue board problems?

[slim and shady]

Well im trying to troubleshoot my board im not sure if it is wrecked or my eyes. Maby something else.

here is the problem...


additinal info-with eyes on empty breach LED light is RED. eyes on something in the breach LED blue. board in MR2. The board and eyes(laser) are practicaly new used like 2 times less then 1/2 in total. Battery fully charged different battery no change. Both batteries were 9.6volt batteries.




scenario...... board on, with eyes ON, marker cocked NO air. technicaly the marker shouldnt fire LED is red indicating nothing is in the breach. if I pull the trigger and hold it down (like a second) it will quickly shift the LED to blue and weekly trip the sear. if on a mode like full auto it will still weekly trip the sear the LED is still blue, wich makes sceance in a weird way because now the bolt is in the way of the beam but the selinoid then wont engage or "click"

If I take my finger and put it in the breach the eyes detect it change LED accordingly and detect when I move it regardless of how quick I do it.

I have no clue whats going on here any ideas?

[bigred76]

It'll trip the sear if you hold it down for 1sec as a clearing shot. This is a feature to clear out a broken ball or to briefly test fire the marker. The other part is a bit hazy to me still, and I'm going to go searching tonight for you.

[slim and shady]

your right about the cleanout Red, but according to virture the selenoid should still be functional after that happens, mine is not