Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Mechanical Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 03-29-2009, 05:26 AM
buhhda05's Avatar
buhhda05 buhhda05 is offline
Buhhda
 
Join Date: Mar 2009
Location: Union ****ty
Posts: 3
Default E-MR1 dropping pressure

I just bought an EMR1 and the first time I took it out, I started playin on full auto and the bolt wouldn't always recock completely. What can I do? When I bought the gun I also purchased a volumizer with it but it wouldn't fit on the marker b/c it was threded and my marker wasn't. Any help resolving these issues would be greatly appreciated
Reply With Quote
  #2  
Old 03-29-2009, 06:49 AM
irishwarrior's Avatar
irishwarrior irishwarrior is offline
this is my coat of arms and this is my dynasty Uí Fiachrach
 
Join Date: Jul 2006
Location: VA
Posts: 1,283
Default Re: E-MR1 dropping pressure

Well, if you're using CO2 you could be experiencing shoot-down, causing the bolt to fail to recock. You could also be exceeding the cyclic rate of the MR1. And short of threading the marker, there isn't much you can do about the volumizer you have.
__________________
People crave what they don't have.

Vid of me and my Guitar
derek_owns_a_guerrilla_radio-School buses don't = target practice, Hoss.. 
Hossapher-i shot alot of different types


MR1 Sniper Rifle
Rocket Launcher
Reply With Quote
  #3  
Old 03-29-2009, 08:23 AM
ProX ProX is offline
Member
 
Join Date: Mar 2009
Posts: 34
Default Re: E-MR1 dropping pressure

Yes to the above, or a lesser possibility could be that it needs some oil.
__________________
My MR 1 low pressure conversion.
http://forum.specialopspaintball.com...pic=146421&hl=
Reply With Quote
  #4  
Old 03-29-2009, 06:23 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: E-MR1 dropping pressure

Quote:
Originally Posted by irishwarrior View Post
Well, if you're using CO2 you could be experiencing shoot-down, causing the bolt to fail to recock. You could also be exceeding the cyclic rate of the MR1. And short of threading the marker, there isn't much you can do about the volumizer you have.



Irish thinks he knows everything
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
  #5  
Old 03-29-2009, 06:28 PM
irishwarrior's Avatar
irishwarrior irishwarrior is offline
this is my coat of arms and this is my dynasty Uí Fiachrach
 
Join Date: Jul 2006
Location: VA
Posts: 1,283
Default Re: E-MR1 dropping pressure

I don't think I know everything, I know I know everything
__________________
People crave what they don't have.

Vid of me and my Guitar
derek_owns_a_guerrilla_radio-School buses don't = target practice, Hoss.. 
Hossapher-i shot alot of different types


MR1 Sniper Rifle
Rocket Launcher
Reply With Quote
  #6  
Old 03-29-2009, 06:30 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: E-MR1 dropping pressure

__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
  #7  
Old 04-04-2009, 11:44 AM
buhhda05's Avatar
buhhda05 buhhda05 is offline
Buhhda
 
Join Date: Mar 2009
Location: Union ****ty
Posts: 3
Default Re: E-MR1 dropping pressure

I appreciate all of the suggestions. I did find that Trinity paintballs seems to make a volumizer that might fit on my gun.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 07:55 PM.