Severely need help!!! Pilot ACS firing problems

[Aman546]

All right, i am new to forums so forgive me if i do not follow a certain etiquette. But i have my pilot Acs and it is malfunctioning and i do not know what to do.

The electronic portion of the gun seems to be working fine but when i hook up any co2 the gun simply does not fire. I can feel the air go into the handle because it gets cold but then when i fire there is not pressure and the cocking bolt goes right back to its forward position. I have charged it extensivily and refilled the co2, taken it apart, but nothing seems to work, please help!

[Griff]

could the valve or bolt be in up side down?

[Aman546]

no its not that, i took it apart again and realized the anti chop mechanism needed to be lubed

[bigred76]

The Anti-Chop doesn't need to be lubed. It's delrin and is self-lubricating.

How far in is the velocity adjuster?

[Aman546]

oh? well when i did that it worked fine, i took it out of the gun and it was all sticky because i had lubed it before and then never got to using it so the lube dried and kind of stuck to the inside of the gun, maybe i should just wash it and lay off the lube, otherwise, the velocity is fine and everything is working good, the only problem is that after a few minutes of not using it, it takes a couple cocks before it gets goin

[Sandman_Bravo]

You can actually swell the delrin bolt with certain lubes. Some people have reported having this problem, I have not. Those who have had this issue run the gambit of having a bolt too fat for the breech. Not exactly the situation you want. Get it cleaned off and lay off the lube like you said. Delrin is self lubricating. Feel free to keep the striker (hammer) lubed up.

[sa kid]

I have a new pilot with eye, i have it set up with auto hopper, some times it firing on semi auto two ball at a time, what do you recomend ? if any one has any feed back on the pilot 09, please respond thanks

[TheDarkShadow]

check you detents