Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-31-2009, 04:51 PM
D4RKKNIGH7's Avatar
D4RKKNIGH7 D4RKKNIGH7 is offline
Join Date: Jan 2009
Posts: 26
Default Custom Ball Detents (Instructions)


Well I Had Some Ball Detent problems but then i thought ill make my own so i did and i found that my idea work perfectly so i made some instructions so you guys could try it I Have a link


Step 1: get The Items You Need

2 Pins (or 3.5mm ball bearings)

1 Pen (Not Working)

Step 2: Pulling out the stick

pull The Stick Off The Pins with some pliers

open the pen and get out the spring and cut it in two with the pliers

Step 3: Putting detents in Gun

Remove your eye covers from the gun
take out detents that are in there
put pin head into detent hole

place the spring half onto pin head

carefully place the eye cover back on and screw it on

do the same to the other side

then looking through the barrel should look like

Step 4: Firing the gun

Well Just Fire it

Video Coming Soon

Please Visit PBWorld Also, link is in my signature
Signature Please Read

Well After A LOT of work doing my website i finally made a temporary one AT PBWorld Please Visit And Register Start Making Posts In The Forum Spreed The Word Of My Site Please That Would Be Great URL = http://PBWorld.ucoz.com

Custom Ball Detents

Last edited by D4RKKNIGH7 : 01-31-2009 at 09:25 PM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -8. The time now is 08:40 AM.