Spyder Forums  

Go Back   Spyder Forums > Shop Talk - Reviews - Polls > Shop Talk > Air Systems
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-18-2008, 06:35 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Regulator help

I have a JackhammerII regulator and its leaking air. on the back of the reg is the adjustment knob in or out, at the opposit end is the fitting where it tightens into my air line, I first thought that it was leaking here so i took the fitting out tefloned it and oiled the seal in there turned it back in, still leaking. so I checked a little farther and here there a 4 tiny allen scres that go around the end and the air is leaking from around there. Is the regulator hoched or is there some way I can fix that? I have little to no experiance with ait assessories and any help is greatly appreciated.
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
  #2  
Old 05-18-2008, 07:30 PM
Zee's Avatar
Zee Zee is offline
Entrepreneur
 
Join Date: May 2008
Location: Ontario, Canada
Posts: 186
Default Re: Regulator help

Well the first thing you should do is specifically find the leak. Use soap and water mix (just a bit of soap) and apply to the areas where you think it might be leaking. If you see bubbles forming then you know its leaking. As for fixing the leak....I'm sure you can McGyver something to stop it. Theres probably someone on the forum that can help in that area more than I can.
__________________
My MR1
- 14" J&J Ceramic
- Adjustable Car Stock
- MR3 Rail w/ Riser
- Archon Hopper
- 3000psi Guerilla HPA
- UPZ Remote
- Tasco Red Dot Sight
- Custom Made Suppressor

Great Stuff Here
http://www.freepaintballplans.com/forum/index.php
Reply With Quote
  #3  
Old 05-18-2008, 07:35 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: Regulator help

I did the soap and water thing already it is leaking arround the 4 tiny allen screws and the "end cap" they are holding on. I cant see tightining the screws stopping the leak, maby if I took it appart there has to be a ring or seal in there that is dry or something to be letting the air go, I am hesitent to take it appart though becaue I just have zero experiance with it. I have too go buy a tiny tiny tiny alley wrench for it to I didnt think they made them that small. Any other sugestions guys?
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
  #4  
Old 05-18-2008, 07:38 PM
Zee's Avatar
Zee Zee is offline
Entrepreneur
 
Join Date: May 2008
Location: Ontario, Canada
Posts: 186
Default Re: Regulator help

If it was me, I'd take it apart and go from there. You can get allen key sets with very small keys for around $10 usually. They're a good investment. Let us know how it goes.
__________________
My MR1
- 14" J&J Ceramic
- Adjustable Car Stock
- MR3 Rail w/ Riser
- Archon Hopper
- 3000psi Guerilla HPA
- UPZ Remote
- Tasco Red Dot Sight
- Custom Made Suppressor

Great Stuff Here
http://www.freepaintballplans.com/forum/index.php
Reply With Quote
  #5  
Old 05-18-2008, 07:41 PM
slim and shady's Avatar
slim and shady slim and shady is offline
Life is peachy
 
Join Date: Jun 2007
Location: Wildwood, Alberta, Canada
Posts: 3,239
Default Re: Regulator help

I have most allen keys but these are exceptinally small. just have to get the one. im not sure what to expect when I open it up though, dont want to wreck it. I am going to talk to the dealer to and see if they will jsut send me a new one, I just though somone on here might know if it was a quick easy fix or not.
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division.
- Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements)
-UCSF Armored Division Commander



Armored Units

-Deep insertion APC
-Killer "B" Battle Tank
-Troop Transport APC (almost done)
-Gun Truck heavy support unit (In the works)



-Order of Lenin (1st)
-Skyline Sergeant
-YGP Rep!
-Sector 4 team feild honor recipiant (UCSF)
Reply With Quote
  #6  
Old 05-18-2008, 07:42 PM
Zee's Avatar
Zee Zee is offline
Entrepreneur
 
Join Date: May 2008
Location: Ontario, Canada
Posts: 186
Default Re: Regulator help

Hope it works out for you.

Good Luck
__________________
My MR1
- 14" J&J Ceramic
- Adjustable Car Stock
- MR3 Rail w/ Riser
- Archon Hopper
- 3000psi Guerilla HPA
- UPZ Remote
- Tasco Red Dot Sight
- Custom Made Suppressor

Great Stuff Here
http://www.freepaintballplans.com/forum/index.php
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 01:48 AM.