|
|
#2
03-25-2008, 03:52 PM
|
||||
|
||||
Re: chopping
what all have you tried?
Here is a few likly causes -Is your bolt broke in? If not thats a good reason -What detents do you use and what condition are they in? If they are sheared of or in poor condition your marker may be double feeding. -What hopper do you use? MR2 work best with a good forcefed hoper to overcome the blowback. The hopper also should be able to feed at LEAST 15 BPS to reach some the markers potential. -What paint are you using? If the paint is old or brittel its more prone to break -What is the temperature when you are playing, if its cold are you using winter paint? If its cold and your not using winter paint that could be your problem, shoot us a few more details and maby we can help you. Never hurts to try the search catagory either.
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division. - Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements) -UCSF Armored Division Commander Armored Units -Deep insertion APC -Killer "B" Battle Tank -Troop Transport APC (almost done) -Gun Truck heavy support unit (In the works) -Order of Lenin (1st) -Skyline Sergeant -YGP Rep! -Sector 4 team feild honor recipiant (UCSF) 
|
|
#4
03-26-2008, 03:50 PM
|
||||
|
||||
|
Re: chopping
did you break in the bolt?
__________________
General Shawn Wayne Tetz, Commander 187th Gaurds Mechanized Rilfe Division. - Includes the 3rd armored brigade from the 34th Gaurds Armored Division. (APC's and armor as well as support elements) -UCSF Armored Division Commander Armored Units -Deep insertion APC -Killer "B" Battle Tank -Troop Transport APC (almost done) -Gun Truck heavy support unit (In the works) -Order of Lenin (1st) -Skyline Sergeant -YGP Rep! -Sector 4 team feild honor recipiant (UCSF)
|
|
#6
03-26-2008, 04:05 PM
|
||||
|
||||
|
Re: chopping
Are you getting double feeds? More than one ball leaving the marker as you fire? That would be a strong indication of a bad detent, which is located underneath the feedneck which will need to be removed. It's a flat rubber looking pad with a rubber nubby that is located where the 4th screw should appear to be on the feedneck.
Sounds like you have a decent hopper, I'd investigate/replace the detent first, if it's not working correctly and the balls aren't settling correctly and halfway into the breech when you fire it's going to chop. Given the fact you don't know where the detents go....I can assume you have the stock detent which in most cases has been less than desirable and a big source of problems for many MR2 owners. Goodluck and let us know what you came up with.
__________________
http://i176.photobucket.com/albums/w...MR2Specops.jpg
|
|
#7
03-26-2008, 08:28 PM
|
||||
|
||||
|
Re: chopping
In my experience you will need a force-fed hopper for that gun to run very fast. My 18V Fasta can't keep up after about the third ball or so...
__________________
And the Lord said, "Simon, Simon! Indeed, Satan has asked for you, that he may sift you as wheat. But I have prayed for you, that your faith should not fail... ...And I will restore to you the years that the locust hath eaten...
|
 |
| Thread Tools | |
| Display Modes | |
|
|
chopping
Linear Mode
