Did I wreck my board?

[Protan]

It was the morining before. It was fully charged within a couple hours before I played. I have another question. Do you think its possible I may have over charged my battery? Can you do that? I turned my gun on today and still having the same problems. Does the gun give a sign when the battery is close to dead?

[TXTeague]

Originally Posted by Protan

It was the morining before. It was fully charged within a couple hours before I played. I have another question. Do you think its possible I may have over charged my battery? Can you do that? I turned my gun on today and still having the same problems. Does the gun give a sign when the battery is close to dead?

Not 100% on the VS1 but on a VS2 the lower LED will blink rapidly green (if in semi-) and rapidly blink orange (if in burst). When you say the batter was fully charged, did you check it on a voltmeter?

[Protan]

Yes it was fully charged it was green which ment it was charged. Its red when its charging up. And I think the same thing is with the vs1 that the led blinks and I didnt see anything blinking.

[swoosh81]

You can overcharge the battery. Have you checked all connections on the board, check your eye wires to see if their pinched.

[Protan]

I figured out what was wrong. One of the wires inside the frame up towards the main part of the gun disconnected from the gun. Unfortunately I didn't know I had a warranty and didn't mail it in so im gonna have to solder it back on.

[TXTeague]

Glad you found your problem. Sounds like it should be an easy fix though.

[Protan]

Hmm wasn't an easy fix it was very hard because I couldnt get the soldering gun in the gap just behind the trigger, it took me about a half hour of figgeting but I finally got it. Very annoying fix especially since I just bought the gun and only used it twice.

[Paintball Freak]

I use a 9.6 volt battery in my VS1, not a 9.5?? It came with a 9.6...