More Cocking Problems :(

[Blue Spyder]

So how do I fix the regulator to let me shoot fast?

[Blue Spyder]

So how do I adjust the regulator to let me shoot fast?

[VS2 King]

You Cant Right Now You Have To Wait Till It Is Broken In.

[king-man]

the stock regs arent really that good even when they are broken in, but if you dont have the money to upgrade. get your bottle on, take the gun to 280ish psi and just dry fire like crazy until your gun runs out of air. do this through a good 2000 shots quik will have it broken in in no time. making it strive to recharge so quik will break it in alot quiker,after youve got it broken in 250 shouldnt be a problem

[Blue Spyder]

How much would a good new reg cost and do you have any links

[Doc77]

Originally Posted by spray and pray

If none of that works open up the reg, throw some oil on the orings, and take out the little gold filter.

I'm assuming that you're new to the VS2 so let me explain what S&P is saying. You don't need to open up the reg/ASA (remember, it's a combo on the VS2) to remove the gold filter. The gold filter is not necessary when you're running on HPA, which I assume you are. To remove the gold filter, just disconnect the macroline fitting from the ASA/reg using a 12mm wrench. The filter sits in between the fitting and the ASA. Just tilt and it will slide right out.

Just so you know how to diagnose recocking problems in the future, the recock is basically when the striker catches on the sear. If it doesn't recock, it's probably due to not enough air pressure (turn up the psi) or too much friction between the stricker and lower tube (clean out the tube, oil the o-rings). You can also try putting a few drops of oil (e.g. Gold Cup) into the ASA (put it on the end where the tank screws on) and dry fire to get the oil through all the lines. Check out swoosh's VS thread (or is it sparky's...I forget which name he uses here). He answers most the FAQs on that thread.

http://www.pbnation.com/showthread.php?t=2498556

[Doc77]

Originally Posted by Blue Spyder

How much would a good new reg cost and do you have any links

A new reg can run anywhere from $30-60. But since the stock one on the VS2 is also the ASA, upgrading the reg means that you have to get a new on/off ASA as well. Here is the reg that I have

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=XO-qF8SwGWCqCYMpH0pqv855FICPBMRus_0=?ProductID=efmsFA Y7a0QAAAD8NRvJWrji

[king-man]

you'll also need a new front blcok from trinity or an adapter from cp, trinity, or new designz, a new asa doenst hurt but if you use the stock one you have to open it all the way prtty much, My setup, Cp Long Reg w/o gauge: $60, trinity front vs front blcok: $40, There are varieties of ASA's, but i like mine so ND Quik Flip: $30, seeing your buddies goggles splattered with paint: priceless
anyways my setup cost me $130you could nock off 10 more bucks if you get the adapter

[spray and pray]

my adapter was $17.