|
|
#1
01-21-2008, 05:00 PM
|
||||
|
||||
Internal Upgrades
What can you guys recommend for internal upgrades? I already have the external upgrades like a hopper, HPA tank, clamping feed neck, barrel. I feel as though I should upgrade the internals, and I'm talking stuff like boards etc.
__________________
98% of ballers wipe, if you are that 2% that has least bit of honor put this in your sig. IF YOUR PARENTS PAY FOR 25% OR LESS FOR YOU TO PLAY PAINTBALL PUT THIS IN YOUR SIGNATURE. 
|
|
#2
01-21-2008, 05:04 PM
|
||||
|
||||
|
Re: Internal Upgrades
T boards are nice upgrades, as well as get a new bolt, and a new lighter striker. Spring kits if you dont have them
A valve would be nice as well. I have a whole list of them in my sig, the Ultimate Resource Thread. Check in there!
__________________
Quote:
|
|
#3
01-22-2008, 02:40 AM
|
||||
|
||||
|
Re: Internal Upgrades
I personally think going low pressure is one of the best things you can do to a Spyder. The gun just plain shoots nicer. Read up on Otter's Spyder pages. You can start out with a new bolt and valve. Be forewarned, upgrading is a disease, just ask MVS1 or VWJimmy. And you'll never get out of the gun the money you put into it. The good part is the excitement of putting it together and tuning it. I don't know how many times I've let people at the field check out my gun & I always offer to let them shoot it; then when I tell them it's a Spyder they're surprised. It's pretty cool to have what's considered to be an entry level marker keep up with upper end ones. I've never gotten a gun and kept it stock, it's just varying degrees of upgrades.
__________________
Think about it: Click Me * My Feedback http://www.zdspb.com/tech/misc/resou...tspertank.html --------  These colors will never run.
|
|
#4
01-22-2008, 11:46 AM
|
||||
|
||||
|
Re: Internal Upgrades
^^AMEN to that brother. And it's a kick watching the reaction of people I loan it to, they can't believe it was a pilot, still is I guess, just a lot harder to recognize as one.
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting  Angel 1 Non-SOM Apr 07 Ripper 3 Non-SOM Apr 08 Family Photo My Feedback
|
|
#5
01-24-2008, 01:50 PM
|
||||
|
||||
Re: Internal Upgrades
__________________
Almost finished LP Pilot <<XX PILOT OWNERS CLUB # 36 XX>> The Official Manual Thread Spyder Feedback PBN Feedback
|
|
#6
01-24-2008, 03:44 PM
|
||||
|
||||
|
Re: Internal Upgrades
iits a suggestion you can add some eyes
__________________
PBAZ Video of all of Kingman's Spyders as of 2008 VS2:Stock, red body kit, 14" 32* Whisper barrel, Fasta Victor 2:halfbacked, ESP Frame T- Board, VS2 Barrel, Magna Valve, ND Valve Pin, Drilled VA, Polished Striker, Bandit 2 O-ring Delrin Bolt, Custom Trigger, Rex Expansion Chamber, ND Feedneck, T-board
|
|
#7
01-24-2008, 05:47 PM
|
||||
|
||||
|
Re: Internal Upgrades
Adding eyes is nice but also a lot of work and potentially a lot of additional expense...with a good loader and a well conditioned ACS bolt you'll be good to go. However if you like tinkering w/stuff then go nuts.
Honestly since your looking at upgrading the internals I would first go after the following... Reg, Front-Block, High-Flow valve and valve pin, aftermarket striker, a spring kit to get everything dialed in and an on/off w/purge ASA. If you watch the BST close you'll be able to find most of these items fairly reasonable.
__________________
Never go Bear hunting without a sandwich...sandwich: someone you can out run or don't mind shooting Angel 1 Non-SOM Apr 07 Ripper 3 Non-SOM Apr 08 Family Photo My Feedback Last edited by MVS1 : 01-24-2008 at 06:04 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
