Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Mechanical Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-15-2007, 04:25 PM
deano 177's Avatar
deano 177 deano 177 is offline
don't let your meat loaf
 
Join Date: Nov 2007
Location: Jacksonville, Florida
Posts: 784
Default Rear cocking MR1

This took a little work but I am pleased how it turned out. If anyone has any questions don't hesitate to ask... and now, on with the show...

Here is the finished version...
http://server.myspace-shack.com/d14/DSC01076_1.jpg

Here is a shot of the venturi bolt with the rear cocking pin... If you noticed I cut the stock's adapter off and incorporated it to my design. I had to drill a 1/4" hole which gave the cocking pin plenty of room to slide through. The bolt is an eye bolt with a closed loop. I felt this would be better for not getting hung up on things but at the same time allowed for a good grip to pull while wearing gloves. The bolt I used has a 12x24 thread pattern and is 3.25" long from the end of the threads to the front of the ring (ring not included in measurment). I also used a nut to lock it to the V-bolt. This is not the correct size because the ball dent screw is metric (just like all the other screws). There is a screw chart pinned in the general spyder forum and some of the MR1's screws there have a number. The ball dent screw does not but I would guess that it is a #14 or #16. Don't quote me on that. At some point I will go to lowes and get the correct size but what I have works for now... I also used some LOCK TIGHT thread locker on the thing...
http://server.myspace-shack.com/d14/DSC01063_1.jpg

Next we have a picture of the Pull Pin Cocking Knob. I kept the original and just used a 1/4x20 bolt that has been cut down to fit. The groove was made by chucking the bolt in my drill and while spinning I lightly touched it to a grinding wheel that was also spinning.
http://server.myspace-shack.com/d14/DSC01068_1.jpg

Here is a rear view of the marker to show what it looks like...
http://server.myspace-shack.com/d14/DSC01069_1_1.jpg

And one more shot of the marker fully assembled...
__________________
SOCTrust

PBNTrust

Last edited by deano 177 : 11-15-2007 at 05:01 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 01:33 AM.