Pilot t-board help!

[Tito=PBL]

Originally Posted by Kenny_McCormic

the big black can shaped thing it stores energy to operate the noid because the battery alone cant supply power fast enough

the capacitator is fine. i think. because it does not bend out like bad ones do it is still in. (the side of it)

Originally Posted by MVS1

You could also check and see if the ep valve enable jumper is dislodged, here is a link... http://www.scenariodreams.com/manual...erc_manual.htm
scroll down to the bottom of the page for the picture. If that is removed or loose your board will not actuate the solenoid. Give it a try before you replace the cap.

that valve jumper did fall out and i still have it. i tryed to put it back in but i wasnt sure as to were it went, but according to the pic i put it back corrent. mabey i put it in backwards.
ill try putting it back together.

[MVS1]

no worries, you cant put it backwards, works the same either way you plug it in. you should be good to go now.