MR2 tested at NJ NAM

[Voodoo27909]

Originally Posted by ViperX

The force fed hopper overcomes the drastic blowby at the bolt that causes a popcorn effect which doesn't allow the balls to settle correctly and trips your acs bolt and that's why you are recocking so much. COMMON PROBLEM WITH THIS MARKER.

Get over yourself.

Well....he is right about the Halo (or similiar system) being the best to use in this case due to it being force fed. That fact comes straight from the Kingman techs. The MR2 is partial to force fed hoppers to keep the chamber loaded correctly

[jimmythefoot]

i am using a force feed hopper
the egg 3
it feeds just as fast as the Halo B according to PBreview.com
so what else could be the problem with cocking so much on full auto....
i know some people say the B is better....but the way it is advertised it is the same as the reloader and the egg 3...over 22+ BPS
it's wierd i never had a problem on Burst with my VS3...?
only a couple of times it has stopped on burst...the MR2 and had to be recocked
the MR2 only has 1ball detent .....could that be it....balls not being gabbed as well when force feed as compared to say the VS3 which has 2 ball detents....just a thought

think a spring kit and bolt would solve the problem or not

[MR2 Woodsballer]

We all told you what are assestment of your problam is and we gave you a solution to solve it. It's up to you to decide what to do with the information we gave you. For the record a Halo B will fix your problams.

[Voodoo27909]

The eggIII is not a true force fed hopper to my knowledge. Its simply a REALLY fast agitating hopper. A true force fed hopper (such as the EmpireB) actually holds pressure on the paint in the feed neck, unlike an Eggy. Egg is a great hopper no question...it just works differently than a Halo or Empire.

[MR2 Woodsballer]

If you are 100% aginst a halo b or empire then get a qloader. This is also a true force feed hopper.

[graphics360]

qloaders are da best

[Alien]

nah qloader are kinda hard to set up , im selling mine if someone interested.

[jimmythefoot]

got a reloader b on the way
and a delrin bolt from alamo
i will see if the B loader stops all the cocking issues and if not
i'll switch out the bolt and see how that works
again the only problem i am having really is in full auto the recocking crap
should get the Loader by tomorrow
the bolt by friday hopefully

[Voodoo27909]

The re-cocking issue is going to be the ACS bolt causing the problem