![]() |
|
#1
|
||||
|
||||
|
My velocity is turned all the way in and air pressure is running at 225 so i don't know tell me what you think clean and lube gun each time used.
__________________
My Setup: http://img407.imageshack.us/my.php?i...ture017mo0.jpg Spyder VS3 VS2 Trigger frame Trinity adapter, CP Reg, CP on/off 14" Black tip http://img529.imageshack.us/my.php?i...ture016ar5.jpg Spyder VS2 VS3 Trigger frame |
|
#2
|
|||
|
|||
|
jack the pressure up to 250-300?
If that fails, buy a stiffer spring
__________________
Marker Setup: Spyder VS2 stock eVLution II Hopper Java 68/4500 tank |
|
#3
|
||||
|
||||
|
Already got a shocktech spring kit and put the 2nd to lowest spring in it and kinda caused recocking issues. So could i have lubed anything to much.
__________________
My Setup: http://img407.imageshack.us/my.php?i...ture017mo0.jpg Spyder VS3 VS2 Trigger frame Trinity adapter, CP Reg, CP on/off 14" Black tip http://img529.imageshack.us/my.php?i...ture016ar5.jpg Spyder VS2 VS3 Trigger frame |
|
#4
|
||||
|
||||
|
seems like your pressure is too low. i had my VS3 running 285+psi this past weekend veloscity backed completely down and i was shooting 280-290fps all day just take the gun to a range and play with the regulator it should fixx the issue
__________________
Jimmy "the Hick"
|
|
#5
|
||||
|
||||
|
your can't hurt the interals or any part of the gun if you run it that high.
__________________
My Setup: http://img407.imageshack.us/my.php?i...ture017mo0.jpg Spyder VS3 VS2 Trigger frame Trinity adapter, CP Reg, CP on/off 14" Black tip http://img529.imageshack.us/my.php?i...ture016ar5.jpg Spyder VS2 VS3 Trigger frame |
|
#6
|
||||
|
||||
|
as long as you stay consistenly under three hundred it will be just fine. to me 285psi is the optimal pressure. you get the best recharge rate at that level and never a decocking issue
![]()
__________________
Jimmy "the Hick"
|
|
#7
|
||||
|
||||
|
thanks
__________________
My Setup: http://img407.imageshack.us/my.php?i...ture017mo0.jpg Spyder VS3 VS2 Trigger frame Trinity adapter, CP Reg, CP on/off 14" Black tip http://img529.imageshack.us/my.php?i...ture016ar5.jpg Spyder VS2 VS3 Trigger frame |
![]() |
| Thread Tools | |
| Display Modes | |
|
|