Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Discontinued Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-19-2007, 06:52 PM
Xtreme's Avatar
Xtreme Xtreme is offline
Swiper no Swiping!
 
Join Date: Sep 2006
Location: NWF
Posts: 92
Default MR Spring Kit and Questions

Ok I did a couple searches and was unable to help myself out so I decided to post. I am going to a scenario event where the fps is below 270 so that is what I am trying to achieve. My marker setup is as follows: New Designz Valve, Palmer's Female Stab., ACP Low Blow, and 32 degree spring kit, I have ran a couple cases of paint through my marker and still have yet to see any decent numbers on the chrono, The fps jumps up/down 15 fps. At the time of chrono I had a light striker spring and a med. valve spring, I have read and followed sundraggon LP setup but no decent results, I have switched to a light valve spring but ran out of day light and paint, Does anyone have any suggestions, or tips that would make this process a little better. The output pressure on the Palmer's is about 300psi, any thing below that it doesn't want to re cock when firing fast.
__________________
My Feedback thread:
http://www.spyder.tv/forums/showthre...052#post184052
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 04:38 AM.