|
|
#1
04-25-2007, 06:23 PM
|
||||
|
||||
bolt won't come out
yeah so i can't get the bolt out of my pilot, its never happened before, i dont know what to do, it comes out like half way, and then it gets stuck on something i can not see. any ideas how to remove it?
__________________
Nothing duct tape can't fix 
|
|
#2
04-25-2007, 07:18 PM
|
|||
|
|||
Re: bolt won't come out
i dont know how to get it out but it sounds like it swull up (expanded) when u oiled it.
__________________
vs2 lucky spitfire w/red eyes green was sold out  green tip makeing barrel 14 inches ventis helix empire reloder b crossfire 47, 3000 tank
|
|
#3
04-25-2007, 07:21 PM
|
||||
|
||||
|
Re: bolt won't come out
Quote:
__________________
SOC Feedback: +32/-0 "To sit back hoping that someday, someway, someone will make things right is to
go on feeding the crocodile, hoping he will eat you last - but eat you he will" Ronald Reagan
|
|
#4
04-25-2007, 07:28 PM
|
||||
|
||||
|
Re: bolt won't come out
yes stripped everything. the bolt is still attached to the striker inside of the gun, the spring is removed, the rest of the gun is disassembled,. the bolt and striker wont come out.
__________________
Nothing duct tape can't fix
|
|
#5
04-25-2007, 08:01 PM
|
|||
|
|||
|
Re: bolt won't come out
Why is this posted in two different forums?
My best guess would also be a swelled bolt.
__________________
Marker Setup: Spyder VS2 stock eVLution II Hopper Java 68/4500 tank
|
|
#7
04-25-2007, 08:46 PM
|
||||
|
||||
|
Re: bolt won't come out
please don't post muliple threads about the same topic. it's much easier for us if you only have one.
__________________
Quote:
My Feedback! (+9/-0) ಠ_ಠ
|
|
#8
04-26-2007, 09:04 AM
|
|||
|
|||
|
Re: bolt won't come out
um if u really need it out that badly hammer it out, then sand it lol i advise you take it to a pro shop and see if they can help
__________________
vs2 lucky spitfire w/red eyes green was sold out green tip makeing barrel 14 inches ventis helix empire reloder b crossfire 47, 3000 tank
|
|
#9
04-26-2007, 09:15 AM
|
||||
|
||||
|
Re: bolt won't come out
You only need one thread per question.
__________________
 "If society is tranquil, it is not because it is conscious of its strength and its well-being, but because it fears its weakness and its infirmities; a single effort may cost it its life. Everyone feels the evil, but no one has courage or energy enough to seek the cure."
|
|
#10
04-26-2007, 12:53 PM
|
|||
|
|||
|
Re: bolt won't come out
Either the bolt has swelled up or you have something wedged between the bolt and gun. (piece of shell). Can either take it to the shop and have them look at it, or stick a dowel rod or something similar in from the front of the gun and tap lightly.
While playing last week guy asked me to look at his Tipp 98. Somehow he managed to get a peice of bark wedged inside his gun. (probably picking up balls off the ground) Talk about a mess.
__________________
Never had a bad day, just some days are better than others. R.I.P. MaXX 05' Pilot ACS (Camo),Egg 3 (Camo),.50g switch, lighter trigger spring, Polished internals, 48/3000, ND Low Rize, Dye Stickies, J&J Ceramic 14"
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
