Imagine probs

[cr1mson]

I have a Spyder Imagine, Kingman ACS bolt, and nothing else aftermarket. It has worked great the few times I have used it. Today, it started burping. The bolt would not recock, and it began to double feed. I use CO2 and it was almost 60 degrees. The velocity decreased greatly also. Anyone have any thoughts?

[ShadowX]

lube up your stiker o-ring and also clean the gun really good and get all paint/debris out, that should fix your burping and not recocking problem.

as for the double feeding it may be a bad ball detent, check them, take the detent off and see if it still is nice and springy and returns correctly, without sticking.

[ad0131065]

is your tank full?

[cr1mson]

My tank was full. I also tried at least three other tanks that were all full and unused. I had the tanks filled the night before, so they weren't too cold either.