Spyder Forums  

Go Back   Spyder Forums > Spyder Markers > Mechanical Markers
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 01-30-2007, 02:03 PM
newkid's Avatar
newkid newkid is offline
Banned
 
Join Date: Mar 2006
Location: some town in south east IN
Posts: 1,792
Default bolt question

I can't take the bolt out of my sonix because the cocking knob is in the way and I can't get it out, and yes it is the new style. any suggestions would be appreciated.
Reply With Quote
  #2  
Old 01-30-2007, 02:46 PM
wbpaintball's Avatar
wbpaintball wbpaintball is offline
ryno enterprises
 
Join Date: Jan 2007
Location: fallston
Posts: 95
Default Re: bolt question

Okay, first you have to remove the disconnect pin from the marker. Then, as you remove the larger pin hold the back in place because there is a spring in there and the spring tension will shoot the internals out of the back of the marker. Slide everything out of the marker and you spyer has been disassembled. Dont be surprised if you see some wear and tear on the bolt when you take it out, no need to worry, it will not effect the performance of the marker.

To reassemble the marker, connect the striker to the bolt and slide that back into the marker. On basically all Spyder markers you push them in and youll notice that they will stop. WHat it is is that the striker is getting caught on the sear. Once you get the internals in, aply some pressure and press the trigger one time and they will slide in. This is on al of the electonic and non-electron is Spyders. Then put the striker buffer [black ring] behind the striker. Most people put it in front of the striker which will decrease the velocity and cause recocking problems so dont do that.Next insert the spring and spring guide after the buffer and hold everything in. Finally insert the disconnect pin back into the marker and you spyder is reassembled
Reply With Quote
  #3  
Old 02-13-2007, 05:30 AM
matrox46 matrox46 is offline
New Guy
 
Join Date: Dec 2006
Posts: 1
Default Re: bolt question

To remove the top cocking knob Ttere is a screw on the back of the bolt just unscrew it counterclockwise a couple of turns and it should come out after you take out the quick disc pin you will have to cock the bolt remove the knob then push something down the barrel to remove the bolt i use a barrel swab to do this. then to put back together just reverse the process you will have to pull the trigger twice to get bolt back in.

Hope this helps
Reply With Quote
  #4  
Old 02-13-2007, 09:13 AM
newkid's Avatar
newkid newkid is offline
Banned
 
Join Date: Mar 2006
Location: some town in south east IN
Posts: 1,792
Default Re: bolt question

thanx
Reply With Quote
  #5  
Old 02-14-2007, 05:26 PM
newkid's Avatar
newkid newkid is offline
Banned
 
Join Date: Mar 2006
Location: some town in south east IN
Posts: 1,792
Default Re: bolt question

Quote:
Originally Posted by matrox46
To remove the top cocking knob Ttere is a screw on the back of the bolt just unscrew it counterclockwise a couple of turns and it should come out
I couldn't unscrew it
Reply With Quote
  #6  
Old 02-14-2007, 06:02 PM
pb34's Avatar
pb34 pb34 is offline
Not too new guy
 
Join Date: Jul 2006
Posts: 1,526
Default Re: bolt question

I'm not positive but I believe the sonix is top cocking like a pilot. On the pilot to remove the knob you just have to pull reallly hard. If you can't do it with your hands you can get a pair of pliers.
__________________
Almost finished LP Pilot

<<XX PILOT OWNERS CLUB # 36 XX>>

The Official Manual Thread


Spyder Feedback
PBN Feedback
Reply With Quote
  #7  
Old 02-15-2007, 11:22 AM
newkid's Avatar
newkid newkid is offline
Banned
 
Join Date: Mar 2006
Location: some town in south east IN
Posts: 1,792
Default Re: bolt question

how do i get it back in?
Reply With Quote
  #8  
Old 02-15-2007, 12:05 PM
Backmanshooter's Avatar
Backmanshooter Backmanshooter is offline
Banned
 
Join Date: Jun 2006
Location: 315 Aztec
Posts: 1,088
Default Re: bolt question

Same way it came out..except opposite. Push it back in.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 12:01 PM.