How to get good performance from my victor 2/II?

[DontShootDaNoob]

I bought a Victor 2 and to sum it up, it doesnt shoot the straightest. What simple low/no cost stuff can I do to it to get the best performance from it? Also, is that little black thing on the side below the chamber feed for the oil and what oil should I use? Thanks.

[Hossy]

make your paint to barrel match (bore size) as close as can be.

get a new barrel

http://www.carolinapbs.com/catalog/p...roducts_id=726

id suggest that one, and definatly buy from that site, the guy who owns it is a mod here and he is an A+ person and will give u the best service around

[DontShootDaNoob]

Thanks but I think the barrel is fine, its the stock from the Victor II V type goggle set. Although, I still had the inaccurate problem before but the O-ring broke on the barrel and I need to know where I can get one that size. Im going to check at some local hardware stores.

[Hossy]

Believe me, get a new barrel. The stock ones are cheap. any new barrel that is not stock will help sooo much.

[DontShootDaNoob]

Ok, anything else I can do to improve performance?

[Hossy]

some of this will cost quite a few bucks, but....

make it LP
new bolt
new reg
go HPA
and id say new ASA and use macro, it will be better in the long run

[DontShootDaNoob]

K, I'll look into those. Thanks.

[Abe2112]

Always keep your internals clean. I take mine apart and REALLY clean it and I can definately see the difference

[TimVanNormal]

Upgrade EVERYTHING!
Just kidding..but really.
I'd definatly look for a barrel.
Redz Peppersticks are 45$, and shoot better then freaks IMO.

[Oscum Guy]

definately get a new asa and barrel.