|
|
|
|
#1
04-11-2006, 01:55 PM
|
||||
|
||||
Help!
Please Some One Help!
How Do You Take The Trigger Roller Pin Out Of The Esp Frame(i Need To Get The Actual Trigger Out.) Any Help Would Be Much Appreciated! 
|
|
#2
04-11-2006, 01:57 PM
|
||||
|
||||
|
Re: Help!
The little pin that looks like a star on one side?
__________________
My favorite DJ, and all his music is free from his site.
Pretty Lights Three years is too long without paintball.
|
|
#3
04-11-2006, 02:07 PM
|
||||
|
||||
|
Re: Help!
Take the frame off, then take the grips off. Look at the pin and find the side WITHOUT the star shapes on it. Use a nail punch, an awl, a nail, anything skinny enough and tap it out on that side (the star shape should be facing down.) It may be in there good, so hit it pretty firmly.
Make sure to remember WHICH side the star shaped side was on and when you put it back together again, reverse the process by putting the NON star shaped end in first then tapping it in flush.
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous
|
|
#4
04-11-2006, 02:10 PM
|
||||
|
||||
|
Re: Help!
Quote:
__________________
My favorite DJ, and all his music is free from his site.
Pretty Lights Three years is too long without paintball.
|
|
#5
04-11-2006, 02:09 PM
|
||||
|
||||
|
Re: Help!
And do it on something with a bit of give, like carpet or something. If you do it with the pin on a table or something hard than it will punch it to the table and stay in place.
__________________
Maybe The Dingo ate Your Baby
|
|
#6
04-11-2006, 02:22 PM
|
||||
|
||||
|
Re: Help!
i dont think this is working... i dont see a star shaped i just see two things that look like washers it looks like there is a rod(the pin) and the trigger with two little silver loops on each side of the trigger
|
|
#7
04-11-2006, 02:30 PM
|
||||
|
||||
Re: Help!
 the star is usually on the left side so you want to beat the right side on some carpet so the pin comes out. dont be afraid to hammer it, the first time its really tight.
__________________
Maybe The Dingo ate Your Baby
|
|
#8
04-11-2006, 02:30 PM
|
||||
|
||||
|
Re: Help!
The pin is just to the left of the switch, right above the trigger. If you don't see it now, what ESP do you have?
You beat me TR
__________________
My favorite DJ, and all his music is free from his site.
Pretty Lights Three years is too long without paintball.
|
|
#9
04-11-2006, 02:55 PM
|
||||
|
||||
|
Re: Help!
well i took a nail and hammer and started beating it at first, il try again, but the first time it seemed like nothing happened.
|
|
#10
04-11-2006, 04:07 PM
|
||||
|
||||
|
Re: Help!
You need a nail or somthing, that'll let you push it out, if you hit it from the side you see the star, it won't come out, just mess up the hole...
SO find the side with the star on the silver pin, flip it over, put a nail on the pin, and hammer it hard, but make sure theres room for it to come out, it can't come out if its on a hard surface.
__________________
05 Imagine Palmer stabilizer Maddman Rocket valve Trinity Front block IPS Sunbear Bolt Dark Horizon titanium striker Green/silver VSC CCI Phantom Red/Black PMR SE
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
