![]() |
|
#1
|
|||
|
|||
![]() My son's 2010 Aggressor model has developed a small leak coming from the barrell--looks to be where the C02 enters the barrel at the vertical. We pulled it apart and lubed the o-rings, etc; which seemed to improve the leak a little, but not entirely. Any other suggestions or do all the internals need to be replaced? source?
Thanks |
#2
|
||||
|
||||
![]() you might check the o-rings for nicks and or replace them. It sounds like it is definitely something in the mechanism of the cup seal/valve
|
#3
|
||||
|
||||
![]() Like TheDarkShadow said, probably has to do the cup seal/valve. Check/replace the cup seal for damage as well as the orings.
__________________
|
#4
|
||||
|
||||
![]() I'll throw my two cents in also and say it's probably the cup seal/valve.
I was just feeling left out....
__________________
Pressing on
Never argue with an idiot; they'll drag you down to their level and beat you with experience." ~ Anonymous |
#5
|
|||
|
|||
![]() thanks for advise. replaced all the o-rings and caps with a replacement kit and everything works fine. Apparently these wear out pretty quickly... probably should keep them oiled more frequently.
|
#6
|
||||
|
||||
![]() I think it can sometimes be luck of the draw. i had a sonix from 05 that i never changed the o-rings. Granted I only ran about 6-8 cases through it in about 4 or 5 years.
|
![]() |
Thread Tools | |
Display Modes | |
|
|