|
|
|
|
#1
06-21-2007, 07:39 PM
|
||||
|
||||
QEV 360 - Epiphany
Anybody have a clue where the QEV installs on an Epiphany? I know they have (and have found) tech articles on help with installing them on an Ion, but not the Epiphany. And even though they are built on a similar platform, I am just not sure they are the exact same. So any suggestions or points towards the right direction would be awesome! Thanks everybody!
__________________
Spyder Pilot ACS Smart Parts All-American Barrel Halo B Hopper CIP Assault Block Palmer Regulator Bob Long 1200 PSI Gauge 32* Spring Kit 
|
|
#2
06-21-2007, 07:58 PM
|
||||
|
||||
Re: QEV 360 - Epiphany
Well... when I had to put one on an ION I had to do a little body dremeling. I think it's the exact same thing with the Epiphany...
__________________
N'Vasion Paintball | T-1 Project | MR1 Project | Feedback (+30,-0) | PBN Feedback (+34,-0) | Myspace | Better Sniping 101 Quote:
|
|
#3
06-22-2007, 03:24 PM
|
||||
|
||||
|
Re: QEV 360 - Epiphany
I'm not sure. Thats what sucks. lol. The Epiphany is still fairly new so there isn't alot of information out there about modifying them. Atleast that I can find. I was hoping all the pros here would have an ideal.
__________________
Spyder Pilot ACS Smart Parts All-American Barrel Halo B Hopper CIP Assault Block Palmer Regulator Bob Long 1200 PSI Gauge 32* Spring Kit
|
|
#4
06-24-2007, 06:58 PM
|
||||
|
||||
|
Re: QEV 360 - Epiphany
probably same place that the QEV went onto in the ion... Replace the middle banjo fitting with the QEV
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
