running an ep gun on co2
well, when i was thinking about how to build my spydercocker, i decided i wanted to try to put the 4way inside the frame. then i thought i came up with a way to make it electronic (but it wouldn't work) after some time, i remembered the mech ion, and that it used the cocker's 4way to control it. after some thought, i figured on a bushmaster/em1 i could mod an esp frame to it, since the tray is now empty of the noid, fit the 4 way in there with some fittings (if it's small enough, if not it could be mounted outside it) and have a plate screwed into the back of the spyder's pancake noid (cut a portion of the back of the frame for clearence, take out the sear, drill a hole in the pancake portion, and screw the plate to it) then attach the 4way to it, put some fittings in the body, hook up the lines, adjust the dwell on the tboard (only way it would work) then bam, you have a co2 friendly ep marker. right?
My Feedback! (+9/-0)
Originally Posted by texastornado from PBN
...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off...