View Single Post
  #11  
Old 03-10-2007, 10:41 AM
Sandman_Bravo's Avatar
Sandman_Bravo Sandman_Bravo is offline
Spyder Vet
 
Join Date: Mar 2006
Location: boondocks, west-bum**ck
Posts: 1,845
Default Re: sundragon products

go with the spli switch, it's what I have. The difference is the spli comes with the wires already attached so all you have to do is SPLIce it in to the existing switch wires. It makes for easier installation. As for the striker, it's nearly half the weight of the original stock unit. I also have that part and it works great; you just have to tune it with a spring kit. Why? Because a lighter hammer = less recoil, AND less weight/inertia so when it hits the valve pin, the valve is opened less than the stock hammer does. I went with a light valve spring and a medium (approximately stock oem tension) main spring. That gave me the dwell (time and amount the valve is open allowing gas thru) I needed for the pressure I run at, which is 300-325 psi. Good luck
__________________
Think about it: Click Me * My Feedback
http://www.zdspb.com/tech/misc/resou...tspertank.html
--------
These colors will never run.
Reply With Quote